QXX35P5 Datasheet, PDF (5/9 Pages) Littelfuse – 30 Amp / 35 Amp bi-directional solid state switch series is designed for AC switching

Teccor^® brand Thyristors
35 Amp Standard & 30 / 35 Amp Alternistor (High Commutation) Triacs
Figure 8: Surge Peak On-State Current vs. Number of Cycles
1000
Qxx35RH5
Qxx35NH5
Qxx35P5
100
Qxx30LH5
10
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State [I_T(RMS)]: Max Rated Value at
Specific Case Temperature
Notes:
1) G ate control may be lost during and
immediately following surge current interval.
2) O verload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
1
Note: xx = voltage
10
100
Surge Current Duration – Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
- Temperature Min (T_s ) _(min)
Pre Heat - Temperature Max (T_s ) _(max)
- Time (min to max) (t_s)
Average ramp up rate (Liquidus Temp)
(T_L) to peak
T_S(max) to T_L - Ramp-up Rate
Reflow
- Temperature (T_L) (Liquidus)
- Time (min to max) (t_s)
Peak Temperature (T_P)
Time within 5°C of actual peak
Temperature (t_p)
Ramp-down Rate
Time 25°C to peak Temperature (T_P)
Do not exceed
150°C
200°C
60 – 180 secs
5°C/second max
5°C/second max
217°C
60 – 150 seconds
260^+0/-5 °C
20 – 40 seconds
5°C/second max
8 minutes Max.
280°C
1000
T_P
T_L
T_S(max)
T_S(min)
Ramp-up
Preheat
t_S
25
time to peak temperature
t_P
t_L
Ramp-down
Time
Qxx30xHx & Qxx35xx & Qxx35xHx Series
141
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.