E133083 Datasheet, PDF (4/5 Pages) Littelfuse – PLEDxSW Series - White Body

PLED Open LED Protectors
PLEDxSW Series
Soldering Parameters
Reflow Condition
Pb – Free assembly
- Temperature Min (T_s(min))
Pre Heat -Temperature Max (T_s(max))
- Time (min to max) (t_s)
Average ramp up rate (Liquidus Temp
(T_L) to peak
T_S(max) to T_L - Ramp-up Rate
Reflow
- Temperature (T_L) (Liquidus)
- Temperature (t_L)
Peak Temperature (T_P)
Time within 5°C of actual peak
Temperature (t_p)
Ramp-down Rate
Time 25°C to peak Temperature (T_P)
Do not exceed
150°C
200°C
60 – 180 secs
3°C/second max
3°C/second max
217°C
60 – 150 seconds
260^+0/-5 °C
30 seconds
6°C/second max
8 minutes max
260°C
Physical Specifications
Terminal Material Copper Alloy
Terminal Finish
Body Material
100% Matte Tin Plated
UL recognized epoxy meeting flammability
classification 94V-0
Environmental Specifications
High Temperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition A
80% min V_DRM (VAC-peak), 150°C,
504 hours
Temperature Cycling
MIL-STD-750: Method 1051
-65°C to 150°C, 15-minute dwell,
100 cycles
Biased Temperature &
Humidity
High Temperature
Storage
EIA/JEDEC: JESD22-A101
80%V_DRM, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
150°C, 1008 hours
Low Temperature
Storage
-65°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Part Numbering System
PLED X S W
TYPE
LED Protector
V _DRM
6 Volts
9 Volts
13 Volts
18 Volts
White Body
PACKAGE TYPE
S: DO-214AA
Part Marking System
DO-214AA
PLx
XXXXX
Packaging
Package
S
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Description
D O - 2 1 4 AA
Packaging Quantity
2500
4
Revision: May 23, 2013
Industry Standard
EIA-481-1
PLEDxSW Series