LSP_17 Datasheet, PDF (3/3 Pages) Littelfuse – LED Lighting Surge Protection Module > LSP10

Surge Protection Module
LED Lighting Surge Protection Module > LSP10
Dimensions
Typical Dimensions (mm)
Typical Dimensions (mm)
56.0 ±0.5
56.0 ±0.5
48.0±1.5
48.0±1.5
2x ø4.8±0.2
2x ø4.8±0.2
100 ±20
100 ±20
48.0 ±1.5
48.0 ±1.5
2.3 ±0.2
2.3 ±0.2
6 ±2 ^{6 ±2}
64⁶⁴.0^.0±^±1¹.^.5⁵
100 ±20
100 ±20
30.0 ±1.0
30.0 ±1.0
6 ±₆2 _±2
Application/Installation Schematic
L
L
L
or N
N/G
G
Parallel Connection
L
AC/DC
N _Power
Supply
+
-
LED Module
SPD
L
L
AC/DC ⁺
N
N _Power
-
Supply
LED Module
G
Parallel Connection
(for Class II Unearthed)
SPD
~X3316
LSP_LS10_PX₁₀X_XX_XX_XXX_XP_P
LS^LP^S10^PX¹X⁰X^XX^XX^XS^XXS
Notes:
1. Black: Line; White: Neutral; Green: Ground.
(P/N with suffix X3333/X3316: Brown: Line; Blue: Neutral; Green-Yellow stripe: Ground)
2. Wire Gauge: AWG14 wire Line in/out; Wire Length: 100mm or customized.
Part Numbering System
LSP 10 480LL P Xxxxx
Device Family
Littelfuse Surge Protection Module
Nominal Discharge
Current (ln)
Operating Voltage
Connection mode
LL: for L, L, N/G
Blank: L-N, L-G, N-G
P or S
(P: parallel connection; S: series connection)
Other non-standard option
X3333: with GND wire connection, available
in 240 and 277Vac, CE marked,
Class I installations, earthed
Wire Color: Line: Brown, Neutral: Blue,
Ground/P: Green with yellow stripe
X3316: without GND wire connection, available
in 240 and 277Vac ratings, CE marked
for Class II installations, unearthed
Wire Color: Line: Brown, Neutral: Blue
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/11/16
L
L
L
or N
N/G
G
L
AC/DC
N _Power
Supply
+
-
LED Module
Parallel Connection
With LED indicating SPD status
- ON (green): SPD is online
- OFF: SPD needs replacement
SPD
LSP10xxxS
LED normally on
R
Notes:
1. Series module used in parallel connection for indication circuit connection.
2. LED indicator and associated circuitry are not included in the module.
3. Black wire is AC line voltage (hot); white wire is AC neutral voltage.
4. Black wire voltage is cut off when SPD needs replacement.
5. R is current limiting resistor; it resistance/wattage is determined by AC line voltage and
desired current driving LED. Example: AC line voltage 240V, LED: 1.6mA, resistor:
150Kohm/0.5W.
L
L
L
or N
N/G
G
Series Connection
L _AC/DC
N _Power
Supply
+
-
LED Module
SPD
LSP10xxxS
L
N
G
Series Connection
(for Class II Unearthed)
SPD
~X3316
L
AC/DC
N _Power
Supply
+
-
LED Module
7