|
SP6002-04UTG-1 Datasheet, PDF (2/7 Pages) Littelfuse – SP6002 Lead-Free/Green Series | |||
|
◁ |
SPA⢠Silicon Protection Array Products
15pF EMI Filter Array with ESD Protection
Absolute Maximum Ratings
Symbol
T
OP
T
STOR
Operating Temperature
Storage Temperature
Parameter
Value
-40 to 85
-60 to 150
Units
°C
°C
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation of
the device at these or any other conditions above those indicated in the operational sections of this speciï¬cation is not implied.
Thermal Information
Parameter
Storage Temperature Range
Maximum Junction Temperature
Maximum Lead Temperature (Soldering 10s)
Rating
-65 to 150
150
260
Units
°C
°C
°C
Electrical Characteristics (TOP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Reverse Standoff Voltage
V
RWM
6.0
V
Breakdown Voltage
VBR
IR=1mA
7.0
7.8
8.5
V
Reverse Leakage Current
I
-&",
V =5V
RWM
0.1
1.0
μA
Resistance
RA
IR=10mA
85
100
115
Ω
Diode Capacitance1,2
CD
VR=2.5V,f=1MHz
15
pF
Line Capacitance1,2
C
L
V =2.5V,f=1MHz
R
24
30
36
pF
IEC61000-4-2 (Contact Discharge)
±30
kV
ESD Withstand Voltage1
V
ESD
IEC61000-4-2 (Air Discharge)
±30
kV
Cutoff Frequency3
F-3dB
Above this frequency, appreciable
attenutation occurs
100
MHz
Notes: 1 Parameter is guaranteed by design and/or device characterization.
2 Total line capacitance is two times the diode capacitance (CD).
3 50Ω source and 50Ω load termination
SP6002 Lead-Free/Green Series
96
Revised: March 25, 2010
©2010 Littelfuse, Inc.
Speciï¬cations are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
|
▷ |