SP3031-01ETG Datasheet, PDF (2/4 Pages) Littelfuse – SP3031 Series 0.8pF 10kV Unidirectional Discrete TVS

TVS Diode Arrays (SPA^® Diodes)
Low Capacitance ESD Protection - SP3031 Series
Absolute Maximum Ratings
Thermal Information
Symbol
I_PP
Parameter
Peak Current (t_p=8/20μs)
Value
5.0
Units
A
T_OP
Operating Temperature
–40 to 125
°C
T_STOR
Storage Temperature
–55 to 150
°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress only rating and operation of the device at these or any other
conditions above those indicated in the operational sections of this specification is not implied.
Parameter
Storage Temperature Range
Maximum Junction Temperature
Maximum Lead Temperature
(Soldering 20-40s)
Rating Units
–55 to 150 °C
150
°C
260
°C
Electrical Characteristics (T_OP=25ºC)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Reverse Standoff Voltage
V_RWM
5.0
Reverse Breakdown Voltage
V_BR
1_R=1mA
6.0
Reverse Leakage Current
I_LEAK
V_R=5V with 1pin at GND
1
Clamp Voltage¹
V_C
I_PP=1A, t_p=8/20µs, Fwd
I_PP=2A, t_p=8/20µs, Fwd
6.9
7.5
Dynamic Resistance
R_DYN
(V_C2-V_C1)/(I_PP2-I_PP1)
0.6
ESD Withstand Voltage¹
IEC61000-4-2 (Contact)
±10
V_ESD
IEC61000-4-2 (Air)
±15
Diode Capacitance¹
C_I/O-I/O
Reverse Bias=0V
0.8
Note: 1. Parameter is guaranteed by design and/or device characterization.
Insertion Loss (S21) I/O to GND
Capacitance vs. Reverse Voltage
Units
V
V
µA
V
V
Ω
kV
kV
pF
0
-5
-10
-15
-20
-25
-30
-35
10
100
1000
Frequency (MHz)
Pulse Waveform
110%
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
0.0
5.0
10.0
15.0
20.0
25.0
30.0
Time (μs)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.0
1.0
2.0
3.0
4.0
5.0
DC Bias (V)
Transmission Line Pulsing(TLP) Plot
TLP Voltage (V)
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/20/13