V130LA1P_10 Datasheet, PDF (13/13 Pages) Littelfuse – Radial Lead Varistors

Varistor Products
Radial Lead Varistors > LA Series
Part Numbering System
BASE PART CODES OPTION CODES
(See Ratings & Specifications tables and notes below) (See notes below)
V XXXX LA XX X P XXXXX
For “VARISTOR”
V_M(AC)
(Three or four digits -- 130V to 1,000V)
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
(See BASE PART CODES notes below)
LA = Bulk Pack / Straight Leads (standard)
LC = Bulk Pack / Crimped and Trimmed Leads
LS = Tape and Reel / Straight Leads
LT = Tape and Reel / Crimped Leads
LU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
CLAMP VOLTAGE VARIANT
(One digit, where applicable)
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
See OPTIONS CODES notes below
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
Ordering Notes:
BASE PART CODES:
Series + Packaging / Lead Style Designators:
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
Straight
Lead
Tape &
Reel
V130LA2P V130LS2P
Crimped
Lead
Tape &
Reel
V130LT2P
Crimped &
Trimmed
Lead
Bulk Pack
V130LC2P
Under-
Crimp
Lead
Tape &
Reel
V130LU2P
Crimped leads are standard on LA Series varistors supplied in
tape and reel, denoted with "LT." For crimped leads without
trimming and any varitions other than that described above,
please contact Littelfuse.
Littelfuse LA Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet. Contact your Littelfuse
sales representative to discuss non-standard options.
OPTION CODES:
X10: 10mm lead spacing option --
For 10 (-/+1) mm lead spacing (available on 20mm
diameter models only), append standard model
BASE PART number with "X10." Example:
Standard Model
Order As
V130LA20AP V130LA20APX10
X2855: Nickel Barrier coated wire option --
All standard parts use Tin–coated Copper wire. Nickel
Barrier coated wire is available as an option, consisting
of Copper wire with a flashing of Nickel followed by
a top coating of Tin. To order append standard model
BASE PART number with "X2855." Example:
Standard Model
Order As
V130LA20AP V130LA20APX2855
X1347: Hi-Temperature phenolic coating option --
Phenolic Coated LA Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V230LA20APX1347).
For additional information please refer to the section labeled
"Phenolic Coating Option" on the third page of this document
under the "Electrical Characteristics" table.
©2010 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/la.html for current information.
Revision: August 4, 2010
LA Varistor Series