V05E50P Datasheet, PDF (12/12 Pages) Littelfuse – Reduced footprint and volume required for surge protection

Metal-Oxide Varistors (MOVs)
Radial Leaded Varistors > LV UltraMOV^TM Varistor Series
Tape and Reel Specifications (continued)
NOTES:
• Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
• Leads are offset by product dimension e1
• Conforms to ANSI and EIA specifications
• Can be supplied to IEC Publication 286-2
SYMBOL
DESCRIPTION
P Pitch of Component
P₀
Feed Hole Pitch
P₁
Feed Hole Center to Pitch
P₂
Hole Center to Component Center
F
Lead to Lead Distance
h Component Alignment
5mm
12.7 +/- 1.0
12.7 +/- 0.2
3.85 +/- 0.7
6.35 +/- 1.0
5.0 +/- 1.0
2.0 Max
7mm
12.7 +/- 1.0
12.7 +/- 0.2
3.85 +/- 0.7
6.35 +/- 1.0
5.0 +/-1.0
2.0 Max
MODEL SIZE
10mm
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
2.0 Max
14mm
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
2.0 Max
20mm
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
2.0 Max
W Tape Width
18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5
W₀ Hold Down Tape Width
W₁ Hole Position
W₂ Hold Down Tape Position
H
Height from Tape Center to
Component Base
H₀ Seating Plane Height
H₁ Component Height
D₀ Feed Hole Diameter
t
Total Tape Thickness
U Undercrimp Width
p Component Alignment
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50
0.5 Max
0.5 Max
0.5 Max
0.5 Max
0.5 Max
18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0
16.0 +/- 0.5
29.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
3° Max
16.0 +/- 0.5
32.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
3º Max
16.0 +/- 0.5
36.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
3° Max
16.0 +/- 0.5
40.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
3° Max
16.0 +/- 0.5
46.5 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
3° Max
Part Numbering System
V 05 E 11 P L1 B 5 XXXXX
Littelfuse Varistor
Disc Size
05, 07, 10, 14 or 20 mm
Coating
E: Epoxy
P: Phenolic
VM(AC)RMS
11V to 40V
Lead-Free and
RoHS Compliant
Other
Non-Standard
Options
Lead Spacing Options
Blank: Standard lead spacing
(See Dimensions Table)
5: 5mm+/-1.0mm
7: 7.5mm+/-1.0mm
1: 10mm+/-1.0mm
Packaging
Blank or B: Bulk Pack
T: Tape and Reel
A: Ammo Pack
Lead Formation
Blank or L1: Straight
L2: Crimped
L3: In-Line
L4: Trim/Crimp (Bulk pack only)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15