V150LT10A Datasheet, PDF (11/11 Pages) Littelfuse – Varistor Products

Varistor Products
Line Voltage Operation, Radial Lead
LA Varistor Series
Additional Lead Style Options
Radial lead types can be supplied with combination preformed crimp and
trimmed leads. This option is supplied to the dimensions shown.
2
*Seating plane interpretation per IEC-717
CRIMPED AND TRIMMED LEAD
VARISTOR MODEL SIZE
7mm
10mm
14mm
20mm
SYMBOL
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
A
-
15
-
19.5 (0.768)
-
22.5 (0.886)
-
29.0 (1.142)
-
(0.591)
-
-
-
L_TRIM
2.41 (0.095) 4.69 (0.185) 2.41 (0.095)
NOTE: Dimensions in millimeters, inches in parentheses.
• To order this crimped and trimmed lead style, standard radial type
model numbers are changed by replacing the model letter “A” with “C”.
Example:
For crimped leads without trimming and any variations to the above,
contact Littelfuse.
4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185)
LA series varistors for Hi-Temperature operating conditions:
• Phenolic Coated LA Series devices are available with improved maxi-
mum operating maximum temperature 125°C.
• These devices also have improved temperature cycling performance
capability.
• Ratings and Specifications are as per standard LA Series except Hi-Pot
encapsulation Isolation Voltage Capability = 500V.
• To order: add X1347 to part number (e.g. V230LA20AX1347)
• Marked identifier will contain 'P' to denote Phenolic.
• These devices are not UL, CSA, VDE or CECC certified.
• Contact factory for further details.
• For 10/±1mm lead spacing on 20mm diameter models only; append
standard model numbers by adding “X10”.
Example:
STANDARD CATALOG
MODEL
V130LA20A
ORDER AS:
V130LA20AX10
Ordering Information
LA series Varistors are shipped standard in bulk pack with straight leads
and lead spacing outlined in the package dimensions on page 4-13.
Contact your Littelfuse sales representative to discuss the non-standard
options outlined below.
V XXX LA XX X
VARISTOR
CLAMP VOLTAGE VARIANT
(Where Applicable)
V_M(AC)
130V to 1,000V
RELATIVE ENERGY INDICATOR
(One or Two Digits)
SERIES DESIGNATOR/
LEAD STYLE DESIGNATOR
LC = Crimped and Clipped
LS = Straight
LT = Crimped
LU = Under Crimped
77
www.littelfuse.com