V20E275PL1T7 Datasheet, PDF (10/16 Pages) Littelfuse – Radial Lead Varistors UltraMOVTM Series

Varistor Products
Radial Lead Varistors > UltraMOV^TM Series
Tape Specifications for Reel and Ammo Pack Items (Refer to drawings on previous page)
• Conforms to ANSI and EIA specifications.
• Can be supplied to IEC Publication 286-2.
• Radial devices on tape are offered with crimped leads, straight leads, or in-line leads. See Ordering Information.
• For 10mm devices 'P' (component pitch) is 12.7mm when 'F' (lead space) is 5mm.
• 7mm parts are available on tape and reel up to 460 VAC only
• 10mm parts are available on tape and reel up to 510 VAC only
• 14mm and 20mm parts are available on tape and reel up to 550 VAC only
• 7mm devices with 7.5mm lead spacing option will be taped at 25.4mm component pitch and 500 pieces per reel
• 10mm devices with 5.0mm lead spacing option will be taped at 12.7mm component pitch and 1000 pieces per reel
Symbol
Description
B₁
Component Top to Seating Plane
C
Crimp Length
P
Pitch of Component
P₀
Feed Hole Pitch
P₁
Feed Hole Center to Pitch
P₂
Hole Center to Component Center
F
Lead to Lead Distance
Δh Component Alignment
W
Tape Width
W₀
Hold Down Tape Width
W₁
Hole Position
W₂
Hold Down Tape Position
H
Height from Tape Center to Component Base
H₀
Seating Plane Height
H₁
Component Height
D₀
Feed Hole Diameter
t
Total Tape Thickness
Δp Component Alignment
7mm
15 Max
2.4 Typ
12.7 +/- 1.0
12.7 +/- 0.2
3.85 +/- 0.7
6.35 +/- 0.7
5.0 +/- 0.8
2.0 Max
18.0 +1.0 / -0.5
12.0 +/- 0.3
9.0 +0.75 / -0.50
0.5 Max
18.0 +2.0 / -0.0
16.0 +/- 0.5
32.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
3° Max, 1.00mm
Model Size
10mm
14mm
19.5 Max
22.5 Max
2.6 Typ
2.6 Typ
25.4 +/- 1.0
25.4 +/- 1.0
12.7 +/- 0.2
12.7 +/- 0.2
8.85 +/- 0.7
8.85 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
7.5 +/- 0.8
7.5 +/- 0.8
2.0 Max
2.0 Max
18.0 +1.0 / -0.52 18.0 +1.0 / -0.5
12.0 +/- 0.3
12.0 +/- 0.3
9.0 +0.75 / - 0.50 9.0 +0.75 / 0.50
0.5 Max
0.5 Max
18.0 +2.0 / -0.0 18.0 +2.0 / -0.0
16.0 +/- 0.5
16.0 +/- 0.5
36.0 Max
40.0 Max
4.0 +/- 0.2
4.0 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
3° Max, 1.00mm 3° Max, 1.00mm
20mm
29 Max
2.6 Typ
25.4 +/- 1.0
12.7 +/- 0.2
7.70 +/- 0.7
12.7 +/- 0.7
10.0 +/- 0.8
2.0 Max
18.0 +1.0 / -0.5
12.0 +/- 0.3
9.0 +0.75 / -0.50
0.5 Max
18.0 +2.0 / -0.0
16.0 +/- 0.5
46.5 Max
4.0 +/- 0.2
0.7 +/- 0.2
3° Max, 1.00mm
For information on tape and reel packaging quantities, please refer to the Ordering Notes section at the end of this document.
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/12/14