ZEN164V130A24LS Datasheet, PDF (1/9 Pages) Littelfuse – Polymer Enhanced Zener Diode

PolyZen
Polymer Enhanced Zener Diode
Micro-Assemblies
PRODUCT : ZEN164V130A24LS
DOCUMENT: SCD27330
REV LETTER: D
REV DATE: JULY 26, 2016
PAGE NO.: 1 OF 10
Specification Status: Released
GENERAL DESCRIPTION
Littelfuse PolyZen devices are polymer
enhanced, precision Zener diode micro-
assemblies. They offer resettable
protection against multi-Watt fault
events without the need for multi-Watt
heat sinks.
The Zener diode used for voltage
clamping in a PolyZen micro-assembly
was selected due to its relatively flat voltage vs current
response. This helps improve output voltage clamping,
even when input voltage is high and diode currents are
large.
An advanced feature of the PolyZen micro-assembly is that
the Zener diode is thermally coupled to a resistively non-
linear, polymer PTC (positive temperature coefficient) layer.
This PTC layer is fully integrated into the device, and is
electrically in series between VIN and the diode clamped
VOUT.
This advanced PTC layer responds to either extended
diode heating or overcurrent events by transitioning from a
low to high resistance state, also known as ”tripping”. A
tripped PTC will limit current and generate voltage drop. It
helps to protect both the Zener diode and the follow on
electronics and effectively increases the diode’s power
handling capability.
The polymer enhanced Zener diode helps protect sensitive
portable electronics from damage caused by inductive
voltage spikes, voltage transients, incorrect power supplies
and reverse bias. These devices are particularly suitable
for portable electronics and other low-power DC devices.
BENEFITS
 Stable Zener diode helps shield
downstream electronics from
overvoltage and reverse bias
 Trip events shut out overvoltage and
reverse bias sources
 Analog nature of trip events minimizes
upstream inductive spikes
 Minimal power dissipation requirements
 Single component placement
FEATURES
 Overvoltage transient suppression
 Stable VZ vs fault current
 Time delayed, overvoltage trip
 Time delayed, reverse bias trip
 Multi-Watt power handling capability
 Integrated device construction
 RoHS Compliant
TARGET APPLICATIONS
 DC power port protection in portable
electronics
 DC power port protection for systems
using barrel jacks for power input
 Internal overvoltage & transient
suppression
 DC output voltage regulation
TYPICAL APPLICATION BLOCK DIAGRAM
Power Supply
(External or Internal)
PolyZen Protected Electronics
GND
2
V_{IN 1 PolyZen}
+
Device
V_OUT
3 Regulated
Output
R_Load
Protected downstream
electronics
© 2016 Littelfuse,Inc.
Specifications are subject to change without notice.
Revised July 26,2016
littelfuse.com