XGD10603NR Datasheet, PDF (1/4 Pages) Littelfuse – Surface Mount Polymeric Electrostatic Discharge Suppressors

XTREME-GUARD™ ESD Suppressors
Surface Mount Polymeric Electrostatic Discharge Suppressors
Reference Dimensions:
XGD Series
1.04
(0.041") REF
1.66 +/- 0.06
(0.066" +/- 0.003”)
0.15 +/- 0.08
(0.006" +/- 0.003”)
0.36 (0.014")
0.84 +/- 0.05
(0.033" +/- 0.002”)
0.43 +/- 0.18
(0.017" +/- 0.007”)
Reflow Solder
Wave Solder
0.51 (0.020")
3.05
(0.120")
1.27 (0.050")
0.76 (0.030")
3.30
(0.130")
1.27 (0.050")
0.76 (0.030")
0.76 (0.030")
Equivalent Circuits
0402 and 0603 Devices
Equivalent Circuit
1
2
Description
XTREME-GUARD^TM ESD Suppressors protect sensitive
electronic equipment against extreme ESD conditions, in
very small 0402 and 0603 footprints. This series product is
specifically designed to suppress fast-rising ESD transients
up to 30kV while adding virtually no capacitance to the
circuit, which helps preserve signal integrity and minimize
data loss. It is designed as RoHS compliant, halogen free,
and Pb free.
Features
• High ESD Rating up to
30kV Contact/Air
Discharge
• RoHS compliant, lead-free
and halogen-free
• Ultra-low capacitance
• Low leakage current
• Fast response time
• Bi-directional
• Withstands multiple
ESD strikes
• Compatible with
pick-and-place processes
• Available in 1000, 5000,
and 10000 piece reels
(EIA-RS481)
• High rated voltage up to
32V maximum
• High operating
temperature at 125ºC
Product Characteristics
Part Number
XGD10402
XGD10603
Lines
Protected
1
1
Component
Package
0402
0603
Available as
Halogen-Free
Yes
Yes
Applications
• Wearable Devices
• Notebooks/Laptops/PCs
• Gaming Consoles
• Smart TVs
• Smart Phones
• Tablets
• Set Top Boxes
• Networking and Wireless
Hardware
• Stationary and Portable
Medical Devices
Electrical Characteristics
Specification
ESD Capability:
IEC 61000-4-2 Contact Discharge (typical)
IEC 61000-4-2 Air Discharge (typical)
Trigger Voltage
Clamping Voltage (typical)
Trigger Voltage (typical)
Clamping Voltage (typical)
Rated Voltage (maximum)
Capacitance (typical)
Response Time
Leakage Current (typical)
XGD10402
30kV
30kV
250V
40V
150V
40V
24V max
0.04 pF
<1nS
<1nA @24V
XGD10603
30kV
30kV
400V
40V
300V
28V
32V max
0.09 pF
<1nS
<1nA @24V
Notes
The ESD capability measured by direct and air discharge
method is subject to testing equipment and conditions.
Numerous factors could affect the reliability and reproducibility
of the direct and air discharge test results.
Measured per IEC 61000-4-2
8kV Direct Discharge Method
Measured using 500V TLP Direct Discharge Method
Measured at 250MHz
ESD Pulse Withstand
1000
pulses min
1000
pulses min
Some shifting in characteristics may occur when tested over
multiple pulses at a very rapid rate
Note:
1. Testing performed on Littelfuse test setup as described in Typical Test Setup Section on page 4 of this document.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 09/01/15