V9MLA0603H Datasheet, PDF (1/8 Pages) Littelfuse – Surface Mount Multilayer Varistors (MLVs) MLA Series

Varistor Products
Surface Mount Multilayer Varistors (MLVs) > MLA Series
MLA Varistor Series
RoHS
Size Table
Metric
1005
1608
2012
3216
3225
EIA
0402
0603
0805
1206
1210
Absolute Maximum Ratings
• For ratings of individual members of a series, see device ratings and specifications table.
Continuous
Steady State Applied Voltage:
DC Voltage Range (V_M(DC))
AC Voltage Range (V_M(AC)RMS)
Transient:
ML Series Units
3.5 to 120 V
2.5 to 107 V
Non-Repetitive Surge Current, 8/20µs
Waveform, (I_TM)
4 to 500
A
Non-Repetitive Surge Energy,
10/1000µs Waveform, (W_TM)
0.02 to
2.5
J
Operating Ambient Temperature Range (T_A)
-55 to
+125
ºC
Storage Temperature Range (T_STG)
-55 to
+150
ºC
Temperature Coefficient (αV) of Clamping
Voltage (V_C) at Specified Test Current
<0.01
%/º C
Additional Information
Datasheet
Resources
Samples
Description
The MLA Series (also known as "ML" series) family of
transient voltage surge suppression devices is based on
the Littelfuse Multilayer fabrication technology. These
components are designed to suppress a variety of
transient events, including those specified in IEC 61000-4-2
or other standards used for Electromagnetic Compliance
(EMC). The MLA Series is typically applied to protect
integrated circuits and other components at the circuit
board level.
The wide operating voltage and energy range make the
MLA Series suitable for numerous applications on power
supply, control and signal lines.
The MLA Series is manufactured from semiconducting
ceramics, and is supplied in a leadless, surface mount
package. The MLA Series is compatible with modern
reflow and wave soldering procedures.
It can operate over a wider temperature range than Zener
diodes, and has a much smaller footprint than plastic-
housed components.
Littelfuse Inc. manufactures other multilayer series
products. See the MLE Series data sheet for ESD
applications, MHS Series data sheet for high-speed ESD
applications, the MLN Series for multiline protection and
the AUML Series for automotive applications.
Features
• RoHS compliant
• Leadless 0402,
0603, 0805, 1206
and 1210 chip sizes
• Multilayer ceramic
construction
technology
• -55°C to +125°C
operating temp. range
• Operating voltage
range V_M(DC) =
5.5V to 120V
• Rated for surge
current (8 x 20µs)
• Rated for energy
(10 x 1000µs)
• Inherent bi-directional
clamping
• Standard low
capacitance
types available
• ESD rated to IEC
61000-4-2, Level 4: Air
Discharge 15KV and
Contact Discharge 8KV
Applications
• Suppression of
inductive switching
or other transient
events such as EFT
and surge voltage at
the circuit board level
• ESD protection for IEC
61000-4-2 (Level 4),
MIL-STD-883c method
3015.7, and other
industry specifications
(see also the MLE
or MLN Series)
• Provides on-board
transient voltage
protection for ICS
and transistors
• Used to help achieve
electromagnetic
compliance of
end products
• Replace larger surface
mount TVS Zeners in
many applications
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/16/14