TP6KE13A Datasheet, PDF (1/5 Pages) Littelfuse – Hi reliability application and automotive grade AEC-Q101 qualified

TVS Diodes
Axial Leaded – 600W > TP6KE series
TP6KE Series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(T_A=25^OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
P_PPM
600
W
(Note 1)
Steady State Power Dissipation on
Infinite Heat Sink at T_L=75ºC (Fig. 6)
P_D
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional I_FSM
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
V_F
Only
5.0
W
100
A
3.5
V
Operating Junction and Storage
Temperature Range
T_J, T_STG -55 to 175 °C
Typical Thermal Resistance Junction
to Lead
R_uJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
R_uJA
75
°C/W
Notes:
1. Non-repetitive current pulse, per Fig. 4 and derated above T_J (initial) = 25^OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
Functional Diagram
Description
The AEC-Q101 qualified TP6KE Series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events.
Features
• Hi reliability application
and automotive grade
AEC-Q101 qualified
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
• Glass passivated chip
• Low incremental surge
junction in DO-15 Package resistance
• 600W peak pulse
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2 (IEC801-2)
• High temperature
to reflow soldering
guaranteed: 260°C/40sec
/ 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• V_BR @ T_J= V_BR@25°C
x (1+αT x (T_J - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• Plastic package has
underwriters laboratory
flammability classification
94V-O
• Lead-free matte tin plated
package
• Halogen free and RoHS
compliant
Applications
TVS devices are ideal for the protection of I/O interfaces,
V_CC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Cathode
TP6KE Series
Bi-directional
Uni-directional
Anode
8816
©2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/08/15