T10C080B Datasheet, PDF (1/2 Pages) Littelfuse – SIDACtor® Device

T10C SIDACtor® Device
RoHS
1
The bi-directional T10C devices are a through-hole technology SIDACtor protector. It is
(T)
2 ^{intended for cost-sensitive telecommunication applications. The three-terminal configuration}
3
(G) _{matches G.D.T. pin configuration; for plug-in applications, the T10C fits in the KRONE™}
(R)
three-point connector block (5B).
This T10 SIDACtor series enables equipment to comply with various regulatory
requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-
968-A (formerly known as FCC Part 68).
For primary protection applications, integrated failsafe options are available.
Electrical Parameters
Part
Number *
T10C080B
T10C080E
T10C110B
T10C110E
T10C140B
T10C140E
T10C180B
T10C180E
T10C220B
T10C220E
T10C270B
T10C270E
V_DRM @ 5 µA
Volts
80
80
105
105
140
140
175
175
214
214
270
270
V_S
Volts
120
120
135
135
170
170
210
210
265
265
360
360
V_T
Volts
4
4
4
4
4
4
4
4
4
4
4
4
I_S
mAmps
800
800
800
800
800
800
800
800
800
800
800
800
I_H
mAmps
120
180
120
180
120
180
120
180
120
180
120
180
pF
Pin 1-2 / 3-2
Tip-Ground, Ring-Ground
TYP
110
110
90
90
83
83
77
77
74
74
68
68
pF
Pin 1-3
Tip-Ring
TYP
61
61
51
51
48
48
44
44
42
42
38
38
* For failsafe option, add “F” at end of part number. See Section 9, “Mechanical Data” for mechanical view of failsafe option.
For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM across Pins 1-2 / 3-2.
• V_S is measured at 0.5 V/µs across Pins 1-2 / 3-2.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
Surge Ratings in Amps
Series
C
* Current waveform in µs
** Voltage waveform in µs
8x20 *
1.2x50 **
Amps
250
I_PP
5x310 *
10x700 **
Amps
125
10x1000 *
10x1000 **
Amps
100
I_TSM
50 / 60 Hz
Amps
50
di/dt
Amps/µs
100
Telecom Design Guide • © 2006 Littelfuse
3 - 29
www.littelfuse.com