SP4062_0627 Datasheet, PDF (1/4 Pages) Littelfuse – SP4062 Series 3.3V 20A Rail Clamp Array

TVS Diode Arrays (SPA^™Family of Products)
Lightning Surge Protection - SP4062 Series
SP4062 Series 3.3V 20A Rail Clamp Array
RoHS Pb GREEN
Description
The SP4062 integrates 4 channels of low capacitance
diodes with an additional zener diode to protect sensitive
I/O pins against lightning induced surge events and
ESD. This robust device can safely absorb up to 20A per
IEC61000-4-5 (t_P=8/20μs) without performance degradation
and a minimum ±30kV ESD per IEC61000-4-2 international
standard. The low loading capacitance makes the SP4062
ideal for protecting high-speed signal pins.
Pinout
1
3
5
GND
97
Functional Block Diagram
9
7
5
1
GND
3
Features
• ESD, IEC61000-4-2,
±30kV contact, ±30kV air
• EFT, IEC61000-4-4, 40A
(tp=5/50ns)
• Lightning, IEC61000-4-5,
20A (tp=8/20µs)
• Low capacitance of 3.5pF
(TYP) per I/O
• Low leakage current of
1µA (MAX) at 3.3V
Applications
• 10/100/1000 Ethernet
Interfaces
• Customer Premise
Equipment (CPE)
• VoIP Phones
• Set Top Boxes
• PBX Systems
Application Example
RJ-45 Connector
J1
*Package is shown as transparent
Ethernet PHY
Tx+
Tx-
SP4062
PHY
Rx+
J8
Rx-
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
SP4062 Series
184
Revision: June 27, 2011
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/SPA for current information.