SGT0640SBT Datasheet, PDF (1/8 Pages) Littelfuse – Silicon Protection Circuits - Surface Mount SurgectorTM Transient Voltage Suppressors

Next
Silicon Protection Circuits
Surface Mount Surgector^TM Transient Voltage Suppressors
Previous
Surgector Thyristors For Telecom Protection
®
Designed to suppress lightning and other transients, Surgector suppressors
are primarily intended for operation on the telephone line “tip and ring”
environment in order to protect telecommunications CPE and COE
products in conjunction with the Littelfuse 461 series Telecom Nano^2® fuse.
These devices provide secondary protection for telecommunication
equipment such as telephone, MODEM, line card and other devices
subject to damage from transient over voltage events. Surgectors can be an
integral part of a Telephone Line Protector Unit, meeting AC Power Cross
criteria when used in association with properly selected resistor/ PTC/ fuse
combinations such as the Littelfuse 461 series fuse. Littelfuse Surface
Mount Surgectors are manufactured using a silicon thyristor technology,
offering bidirectional voltage clamping for transients of either polarity
from a single chip.
The Surgector devices described in this data sheet are manufactured
with the DO-214AA low profile case style and are second source
equivalent parts to industry “SIDAC” types. Surface Mount Surgector
Suppressors are supplied in embossed carrier tape on 330mm
(13in) reels.
Ordering Information
PART
NUMBER
V_BO (MAX)
ATI_BO=800MA
(V)
I_PP(MAX)
10 x 1000µs Pulse
(A)
B TYPES
SGT0640SBT
77
50
SGT0720SBT
88
50
SGT2300SBT
260
50
SGT2900SBT
330
50
SGT3100SBT
350
50
C TYPES
SGT0640SCT
77
100
SGT0720SCT
88
100
SGT1300SCT
160
100
SGT1500SCT
180
100
SGT2300SCT
260
100
SGT2900SCT
330
100
SGT3100SCT
350
100
SGT3500SCT
400
100
NOTE: T Suffix indicates Tape and Reel.
I_PP(MAX)
2 x 10µs Pulse
(A)
320
320
200
200
200
600
600
600
600
500
500
500
500
Features
• Rated for Telecom Industry Transient Surge Levels:
- Telcordia (Bellcore) GR-1089
- ITU CCITT K.20/.21
- FCC PART 68
- UL 60950
• Low Profile Package, Compatible with PCMCIA Cards, UL-94V-0 Listed
• Offered in the Most Common VDRM Voltage Types
• Low On-State Voltage
• Cross to Common Industry Types
• High Minimum Holding Current
AGENCY APPROVALS: Recognized under the components program of
Underwriters Laboratories.
AGENCY FILE NUMBERS: UL E135010.
Applications
• Secondary Protection for:
- DSL modem
- Set Top Box
- Telephone
- FAX
- Modem
- Line Cards
- SLIC
- TLPU Modules
• Alarm Systems
• CATV Lines
• Cable Modems
Symbol
236
www.littelfuse.com