RGEF800-1 Datasheet, PDF (1/2 Pages) Littelfuse – Overcurrent Protection Device

PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RGEF800-1
DOCUMENT: SCD26393
REV LETTER: D
REV DATE: JULY 26, 2013
PAGE NO.: 1 OF 2
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin Plated Copper
(0.81mm [0.032] nom. diameter)
Marking:
G8
Manufacturer’s Mark
and Part Identification
Lot Identification
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm: 11.7 12.7 16.0 20.9
in*: (0.46) (0.50) (0.63) (0.82)
*Rounded off approximation
C
MIN MAX
4.3
5.8
(0.17) (0.23)
TABLE II. PERFORMANCE RATINGS:
I HOLD
CURRENT
INITIAL
RATED
CURRENT
RATINGS
RESISTANCE
VALUES
D
MIN MAX
25.4
--
(1.00) --
E
MIN MAX
2.0
3.0
(0.08) (0.12)
F
TYP
1.2
(0.05)
TIME TO TRIP
R1 MAX
1 HR. POST TRIP
RESISTANCE
STANDARD TRIP
TRIPPED-
STATE POWER
DISSIPATION
AMPS
AT 25C
HOLD
8.0
AMPS
AT 25C
HOLD TRIP
8.0
13.6
OHMS
AT 25C
MIN
MAX
0.0056 0.0110
SECONDS AT
25C, 40.0 A
MAX
5.0
OHMS
AT 25C
MAX
0.0175
WATTS
AT 25C
TYP
3.0
Agency Recognitions: UL, CSA, TUV.
Reference Documents: PS300
Precedence:
This specification takes precedence over documents referenced herein.
Effectivity:
Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION:
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm,
Br+Cl≤1500ppm.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised July 26, 2016
littelfuse.com