RGEF600-1 Datasheet, PDF (1/2 Pages) Littelfuse – Overcurrent Protection Device

PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RGEF600-1
DOCUMENT: SCD25832
REV LETTER: E
REV DATE: JULY 26, 2016
PAGE NO.: 1 OF 2
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin Plated Copper
(0.81mm [0.032] nom. diameter)
Marking:
Manufacturer’s Mark
G6 ^{and Part Identification}
Lot Identification
TABLE I. DIMENSIONS:
A
B
MIN MAX MIN MAX
mm: 9.7 10.7 12.2 17.1
in*: (0.38) (0.42) (0.48) (0.67)
*Rounded off approximation
C
MIN MAX
4.3
5.8
(0.17) (0.23)
D
MIN MAX
25.4
-
(1.0)
-
E
MIN MAX
2.0 3.0
(0.08) (0.12)
F
TYP
1.2
(0.05)
TABLE II. PERFORMANCE RATINGS:
I HOLD
RATED
CURRENT
CURRENT
RATINGS
INITIAL
RESISTANCE
VALUES
TIME TO TRIP
AMPS
AT 25C
HOLD
6.0
AMPS
AT 25C
HOLD TRIP
6.0 10.2
OHMS
AT 25C
MIN MAX
0.0100 0.0190
SECONDS AT
25C, 30A
MAX
3.3
R1 MAX
1 HR. POST
TRIP
RESISTANCE
STANDARD
TRIP
OHMS
AT 25C
MAX
0.0280
TRIPPED-
STATE
POWER
DISSIPATION
WATTS
AT 25C
TYP
2.8
Agency Recognitions: UL, CSA, TUV
Reference Documents: PS300
Precedence:
This specification takes precedence over documents referenced herein.
Effectivity:
Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION:
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
HF
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised July 26, 2016
littelfuse.com