RGEF500-1 Datasheet, PDF (1/2 Pages) Littelfuse – Overcurrent Protection Device

PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RGEF500-1
DOCUMENT: SCD26271
REV LETTER: D
REV DATE: JULY 26, 2016
PAGE NO.: 1 OF 2
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin Plated Copper
(0.81mm [0.032] nom. diameter)
Marking:
G5
Manufacturer’s Mark
and Part Identification
Lot Identification
TABLE I. DIMENSIONS:
A
B
C
MIN MAX MIN MAX MIN MAX
mm: 9.4 10.4 9.4 14.3
4.3
5.8
in*: (0.37) (0.41) (0.37) (0.56) (0.17) (0.23)
*Rounded off approximation
D
MIN MAX
25.4
--
(1.0)
--
E
MIN MAX
2.0 3.0
(0.08) (0.12)
F
TYP
1.2
(0.05)
TABLE II. PERFORMANCE RATINGS:
I HOLD
RATED
CURRENT
CURRENT
RATINGS
INITIAL
RESISTANCE
VALUES
TIME TO TRIP
AMPS
AT 25°C
HOLD
5.0
AMPS
AT 25°C
HOLD TRIP
5.0
8.5
OHMS
AT 25°C
MIN MAX
0.0150 0.0240
SECONDS AT
25°C, 25A
MAX
2.0
R1 MAX
1 HR. POST
TRIP
RESISTANCE
STANDARD
TRIP
OHMS
AT 25°C
MAX
0.0340
TRIPPED-
STATE
POWER
DISSIPATION
WATTS
AT 25°C
TYP
2.6
Agency Recognitions:
UL, CSA, TUV.
Reference Documents:
PS300
Precedence:
This specification takes precedence over documents referenced herein.
Effectivity:
Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION:
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
© 2016 Littelfuse,Inc
Specifications are subject to change without notice.
Revised July 26, 2016
Littelfuse.com