RGEF1200-1 Datasheet, PDF (1/2 Pages) Littelfuse – Overcurrent Protection Device

PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RGEF1200-1
DOCUMENT: SCD26579
REV LETTER: D
REV DATE: JULY 26, 2016
PAGE NO.: 1 OF 2
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
18 AWG Tin Plated Copper
(1.0mm [0.040] nom. Diameter)
Marking:
Manufacturer’s Mark
G12 ^{and Part Identification}
Lot Identification
TABLE I. DIMENSIONS:
A
B
C
D
E
F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TYP
mm: 16.4 17.5 22.6 28.0
9.4
10.9 25.4
-
2.3 3.5
1.4
in*: (0.65) (0.69) (0.89) (1.10) (0.37) (0.43) (1.00) - (0.09) (0.14) (0.06)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
I HOLD
RATED
CURRENT
CURRENT
RATINGS
INITIAL
RESISTANCE
VALUES
TIME TO
TRIP
R1 MAX
1 HR. POST
TRIP
RESISTANCE
STANDARD
TRIP
TRIPPED-
STATE
POWER
DISSIPATION
AMPS
AMPS
OHMS
SECONDS
OHMS
WATTS
AT 25C
AT 25C
HOLD HOLD TRIP
AT 25C
MIN
MAX
AT 25C, 60A
MAX
AT 25C
MAX
AT 25C
TYP
12.0
12.0 20.4 0.0033 0.0057
7.5
0.0086
4.2
Agency Recognitions:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
UL, CSA, TUV.
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
© 2016 Littelfuse,Inc
Specifications are subject to change without notice.
Revised July 26, 2016
littelfuse.com