Q6012LH2 Datasheet, PDF (1/8 Pages) Littelfuse – RoHS Compliant, Solid-state switching eliminates arcing or contact bounce that create voltage transients

Teccor^® brand Thyristors
12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series
Agency Approval
Agency
®
Agency File Number
L Package: E71639
Main Features
Symbol
I_T(RMS)
V_DRM/ V_RRM
I_{GT (Q1)}
Value
12
400 to 1000
10 to 50
Unit
A
V
mA
Schematic Symbol
MT2
MT1
G
®
Description
12 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
• RoHS Compliant
• Glass – passivated
junctions
• Voltage capability up to
1000 V
• Surge capability up to
120 A
• Electrically isolated
“L-Package” is UL
recognized for 2500Vrms
• Solid-state switching
eliminates arcing or
contact bounce that
create voltage transients
• No contacts to wear
out from reaction of
switching events
• Restricted (or limited) RFI
generation, depending
on activation point sine
wave
• Requires only a small
gate activation pulse in
each half-cycle
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, light
dimmers, power tools, lawn care equipment, home/brown
goods and white goods appliances.
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Qxx12xHx Series
99
Revised: November 1, 2010 05:04 PM
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.