Q6006LH456 Datasheet, PDF (1/14 Pages) Littelfuse – 6 Amp bi-directional solid state switch series is designed for AC switching

Teccor^® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series
®
Description
6 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Sensitive type devices guarantee gate control in
Quadrants I & IV needed for digital control circuitry.
Standard type devices normally operate in Quadrants I &
III triggered from AC line.
Alternistor type devices only operate in quadrants I, II, &
III and are used in circuits requiring high dv/dt capability.
Agency Approval
Agency
®
Agency File Number
L Package: E71639
Main Features
Symbol
I_T(RMS)
V_DRM/ V_RRM
I_{GT (Q1)}
Value
6
400 to 1000
5 to 50
Unit
A
V
mA
Schematic Symbol
MT2
MT1
G
Features & Benefits
• RoHS compliant
• Glass – passivated
junctions
• Voltage capability up
to 1000 V
• Surge capability up
to 85 A
• Electrically isolated
“L - Package” is UL
recognized for 2500Vrms
• Solid-state switching
eliminates arcing or
contact bounce that
create voltage transients
• N o contacts to wear out
from reaction of switching
events
• R estricted (or limited) RFI
generation, depending on
activation point of
sine wave
• R equires only a small gate
activation pulse in each
half-cycle
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, light
dimmers, power tools, home/brown goods and white
goods appliances.
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Absolute Maximum Ratings — Sensitive Triac (4 Quadrants)
Symbol
Parameter
I_T(RMS)
RMS on-state current (full sine wave)
Lxx06Ly
Lxx06Vy / Lxx06Dy/ Lxx06Ry
I_TSM
I²t
di/dt
I_GTM
P_G(AV)
T_stg
T_J
Non repetitive surge peak on-state current
(full cycle, T_J initial = 25°C)
I²t Value for fusing
Critical rate of rise of on-state current
I_G = 50mA with 0.1µs rise time
Peak gate trigger current
Average gate power dissipation
Storage temperature range
Operating junction temperature range
f = 50 Hz
f = 60 Hz
t_p = 8.3 ms
f = 120 Hz
t_p ≤ 10 μs
Note: xx = voltage, y = sensitivity
T_C = 80°C
T_C = 85°C
t = 20 ms
t = 16.7 ms
T_J = 110°C
T_J = 110°C
T_J = 110°C
Value
6
50
60
15
70
1.6
0.4
-40 to 150
-40 to 110
Unit
A
A
A²s
A/μs
A
W
°C
°C
Lxx06xx & Qxx06xx & Qxx06xHx Series
61
Revised: June 24, 2011 04:57 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.