PGB1010402 Datasheet, PDF (1/4 Pages) Littelfuse – Surface Mount Polymeric ESD Suppressors

Reference Dimensions:
PulseGu2.2a4 +r/-d0.1^®8 Suppressors
1.66 +/- 0.06
Surface M^(0.0o⁸⁸u^{" +}n^/-t^0.P⁰⁰⁷o^")lymeric ESD Suppressors
1.04
(0.066" +/- 0.003”)
0.15 +/- 0.08
(0.041") REF
3.00 +/- 0.20 ^{(0.006" +/- 0.003”)}
(0.118" +/- 0.008")
1.91
(0.075")
PGB1 Series Lead-Free ^{0.36 (0.014")}
0.69 +/- 0.10
(0.027" +/- 0.004)
0.84 +/- 0.05
(0.033₀"_.9+₁/- 0.002”)
1.09
(0.043")
0.43 +/- 0.18
(0.017" +/- 0.007”)
0.81
(0.032")
TYP
(0.036")
TYP
0.15 +/- 0.08
(0.006 +/- 0.003")
Description
Reflow Solder
0.51 (0.020")
3.05
W^Ra^ev^fe^loS^wo^Sld^oe^lr^der
1.02 (0.040")
2.29
(0.090")
1.27
0.76 (0.030") ^(0.050")
1.02 (0.040")
3¹.3^.00^{2 (0.040")}
TYP
Wave Solder
1.02 (0.040")
2.54
(0.100")
PulseGuard ESD Suppressors help protect sensitive
electronic equipment against electrostatic discharge (ESD).
They supplement the on-chip protection of integrated
1.27
(_c0._i0_r5_c0"_u) _{itry and are best suited for low-voltage, high-speed}
ap₍₁p_0..20l⁷i₅c₀a_")tions where low capacitance is important. Data ports
(0.120")
1.27 (0.050")
0.64
(0.025")
(0.130")
0.51
(0.020") 1.27 (02.0.0530")
(0.080")
0.64
(0.025")
utilizing such high-speed protocols as USB 2.0, IEEE1394,
HDMI and DVI can benefit from this new technology.
2.29
(0.090") _{PulseGuard suppressors use polymer composite materials}
0.76 (0.030")
0.76 (0.030")
to suppress fast-rising ESD transients (as specified in IEC
61000-4-2), while adding virtually no capacitance to the
circuit.
Equivalent Circuits
0402 and 0603 Devices
Equivalent Circuit
1
2
SOT2_E3_quD_ive_av_li_ec_ne_{t Circuit}
3
Features
• RoHS compliant and
lead-free
• Ultra-low capacitance
• Low leakage current
• Fast response time
• Bi-directional
• Withstands multiple
ESD strikes
• Compatible with
pick-and-place processes
• Available in 1000, 3000,
5000 and 10000 piece
reels (EIA-RS481)
1
2
Product Characteristics
Part Number
PGB1010402
PGB1010603
PGB102ST23
Lines Protected
1
1
2
Component Package
0402
0603
SOT23
Applications
• HDTV Hardware
• Laptop/Desktop
Computers
• Network Hardware
• Computer Peripherals
• Digital Cameras
• External Storage
• Set-Top Boxes
Electrical Characteristics
Specification
ESD Capability:
IEC 61000-4-2 Contact Discharge
IEC 61000-4-2 Air Discharge
Peak Voltage (typical)
Clamping Voltage (typical)
Rated Voltage (maximum)
Capacitance (typical)
Response Time
Leakage Current (typical)
PGB1010402
8kV
15kV
1000V
250V
12VDC
0.04 pF
<1nS
<1nA (12 VDC)
PGB1010603
8kV
15kV
500V
150V
24VDC
0.06 pF
<1nS
<1nA (6 VDC)
PGB102ST23
8kV
15kV
500V
150V
24VDC
0.12 pF
<1nS
<1nA (6 VDC)
ESD Pulse Withstand
100 pulses min 1000 pulses min 1000 pulses min
Notes: ¹ Testing performed on Littelfuse Test Set up as described in typical test setup section.
Notes
Measured per IEC 61000-4-2
8kV Contact Discharge¹
Measured per IEC 61000-4-2
8kV Contact Discharge¹, at 25 nsec.
Measured at 250 MHz
Some shifting in characteristics may
occur when tested over multiple
pulses at a very rapid rate
PGB1 Series
Specifications are subject to change without notice.

Electronics Designers Guide
www.littelfuse.com
©2007 Littelfuse