English
Language : 

P1553ACMC Datasheet, PDF (1/2 Pages) Littelfuse – Balanced Three-chip MicroCapacitance (MC) SIDACtor Device
Balanced Three-chip MicroCapacitance (MC) SIDACtor Device
Balanced Three-chip MicroCapacitance (MC)
SIDACtor Device
The balanced three-chip TO-220 MC SIDACtor solid state device protects telecommunica-
1
3
tion equipment in high-speed applications that are sensitive to load values and that require
a lower capacitance. CO values for the MC are 40% lower than a standard AC part.
2
This MC SIDACtor series is used to enable equipment to meet various regulatory
requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and
TIA-968-A (formerly known as FCC Part 68) without the need of series resistors.
Electrical Parameters
Part
Number *
VDRM
VS
VDRM
VS
Volts
Volts
Volts
Volts
VT
IDRM
IS
IT
IH
CO
Pins 1-2, 2-3
Pins 1-3
Volts µAmps mAmps Amps mAmps
pF
P1553AC MC 130
180
130
180
8
5
800
2.2
150
40
P1803AC MC 150
210
150
210
8
5
800
2.2
150
40
P2103AC MC 170
250
170
250
8
5
800
2.2
150
40
P2353AC MC 200
270
200
270
8
5
800
2.2
150
40
P2703AC MC 230
300
230
300
8
5
800
2.2
150
30
P3203AC MC 270
350
270
350
8
5
800
2.2
150
30
P3403AC MC 300
400
300
400
8
5
800
2.2
150
30
P5103AC MC 420
600
420
600
8
5
800
2.2
150
30
* For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.
• IPP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• VDRM is measured at IDRM.
• VS is measured at 100 V/µs.
• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
• Off-state capacitance (CO) is measured between Pins 1-2 and 3-2 at 1 MHz with a 2 V bias.
• Device is designed to meet balance requirements of GTS 8700 and GR 974.
Surge Ratings
Series
C
IPP
2x10 µs
Amps
500
IPP
8x20 µs
Amps
400
IPP
10x160 µs
Amps
200
IPP
10x560 µs
Amps
150
IPP
10x1000 µs
Amps
100
ITSM
60 Hz
Amps
50
di/dt
Amps/µs
500
http://www.littelfuse.com
+1 972-580-7777
2 - 36
© 2004 Littelfuse, Inc.
SIDACtor® Data Book and Design Guide
 ▷