English
Language : 

P1402C_L Datasheet, PDF (1/3 Pages) Littelfuse – TwinSLIC™ Protector
Compak TwinCHIP™ SIDACtor® Device
RoHS
The modified DO-214AA SIDACtor devices provide low-cost, longitudinal protection.
1
(T)
3
(R)
2
(G)
SIDACtor devices enable equipment to comply with various regulatory requirements
including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A
(formerly known as FCC Part 68).
Electrical Parameters
Part
Number
P1402C_L
P1602C_L
P2202C_L
P2702C_L
P3002C_L
P3602C_L
P4202C_L
P4802C_L
P6002C_L
VDRM
Volts
VS
Volts
Pins1-2, 2-3
58
77
65
95
90
130
120
160
140
180
170
220
190
250
220
300
275
350
VDRM
Volts
VS
Volts
Pins 1-3
116
154
130
190
180
260
240
320
280
360
340
440
380
500
440
600
550
700
VT
Volts
4
4
4
4
4
4
4
4
4
IDRM
µAmps
5
5
5
5
5
5
5
5
5
IS
mAmps
800
800
800
800
800
800
800
800
800
IT
Amps
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
IH
mAmps
120
120
120
120
120
120
120
120
120
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.
• IPP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• VDRM is measured at IDRM.
• VS is measured at 100 V/µs.
• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
• UL 60950 creepage requirements must be considered.
Surge Ratings in Amps
IPP
0.2x310 * 2x10 * 8x20 * 10x160 * 10x560 * 5x320 * 10x360 * 10x1000 * 5x310 * ITSM
0.5x700 ** 2x10 ** 1.2x50 ** 10x160 ** 10x560 ** 9x720 ** 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz di/dt
Amps Amps Amps
Amps
Amps Amps Amps
Amps
Amps Amps Amps/µs
A
20
150
150
90
50
75
75
45
75
20
500
B
25
250
250
150
100
100
125
80
100
30
500
* Current waveform in µs
** Voltage waveform in µs
Note: Contact factory for release date of Series B.
Telecom Design Guide • © 2006 Littelfuse
3 - 13
www.littelfuse.com