P1200S_L Datasheet, PDF (1/3 Pages) Littelfuse – LCAS Asymmetrical Discrete Device

LCAS Asymmetrical Discrete Device
RoHS
¨
These DO-214AA SIDACtor^® devices are intended for LCAS (Line Circuit Access Switch)
applications that require asymmetrical protection in discrete (individual) packages. They
enable the protected equipment to meet various regulatory requirements including
GR 1089, ITU K.20, K.21, K.45, IEG 60950, UL 60950, and TIA-968-A (formerly known as
FCC Part 68).
Electrical Parameters
Part
Number *
P1200S_L
P2000S_L
P2500S_L
V_DRM
Volts
100
180
230
V_S
Volts
130
220
290
V_T
Volts
4
4
4
I_DRM
µAmps
5
5
5
I_S
mAmps
800
800
800
I_T
Amps
2.2
2.2
2.2
I_H
mAmps
120
120
120
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For individual “SA”, “SB”, and “SC” surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor^® devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM.
• V_S is measured at 100 V/µs.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
Surge Ratings in Amps
0.2x310 * 2x10 * 8x20 *
0.5x700 ** 2x10 ** 1.2x50 **
10x160 *
10x160 **
I_PP
10x560 *
10x560 **
5x320 *
9x720 **
10x360 * 10x1000 * 5x310 *
I_TSM
10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz
di/dt
Amps Amps Amps
Amps
Amps Amps Amps
Amps
Amps Amps Amps/µs
A
20
150
150
90
50
75
75
45
75
20
500
B
25
250
250
150
100
100
125
80
100
30
500
C
50
500
400
200
150
200
175
100
200
50
500
* Current waveform in µs
** Voltage waveform in µs
www.littelfuse.com
3 - 60
© 2006 Littelfuse • Telecom Design Guide