P0640ECMC Datasheet, PDF (1/2 Pages) Littelfuse – MicroCapacitance (MC) SIDACtor Device

MicroCapacitance (MC) SIDACtor Device
MicroCapacitance (MC) SIDACtor Device
The TO-92 MC SIDACtor series is intended for applications sensitive to load values.
Typically, high speed connections require a lower capacitance. C_O values for MC devices
are 40% lower than a standard EC part.
This MC SIDACtor series is used to enable equipment to meet various regulatory
requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and
TIA-968-A (formerly known as FCC Part 68) without the need of series resistors.
Electrical Parameters
Part
V_DRM
V_S
V_T
I_DRM
I_S
I_T
I_H
C_O
Number *
Volts
Volts
Volts
µAmps
mAmps
Amps
mAmps
pF
P0640EC MC
58
77
4
5
800
2.2
150
60
P1500EC MC
140
180
4
5
800
2.2
150
50
P2600EC MC
220
300
4
5
800
2.2
150
40
P3100EC MC
275
350
4
5
800
2.2
150
40
* For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM.
• V_S is measured at 100 V/µs.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
• Off-state capacitance (C_O) is measured at 1 MHz with a 2 V bias.
Surge Ratings
Series
C
I_PP
2x10 µs
Amps
500
I_PP
8x20 µs
Amps
400
I_PP
10x160 µs
Amps
200
I_PP
10x560 µs
Amps
150
I_PP
10x1000 µs
Amps
100
I_TSM
60 Hz
Amps
50
di/dt
Amps/µs
500
http://www.littelfuse.com
[phone]
2 - 18
© 2004 Littelfuse, Inc.
SIDACtor^® Data Book and Design Guide