P0602A_L Datasheet, PDF (1/3 Pages) Littelfuse – Two-chip SIDACtor

Two-chip SIDACtor® Device
RoHS
The two-chip SIDACtor design provides a through-hole technology protection solution. It is
1
(T)
intended for telecom applications that do not require a balanced solution. For primary
2
3
(G) ^{protection applications, devices with higher holding current and integrated failsafe options}
(R)
are available.
SIDACtor devices enable equipment to comply with various regulatory requirements
including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A
(formerly known as FCC Part 68).
Electrical Parameters
Part
Number *
P0602A_L
P1402A_L
P1602A_L
P2202A_L
P2702A_L
P3002A_L
P3602A_L
P4202A_L
P4802A_L
P6002A_L
V_DRM
Volts
V_S
Volts
Pins 1-2, 3-2
25
40
58
77
65
95
90
130
120
160
140
180
170
220
190
250
220
300
275
350
V_DRM
Volts
V_S
Volts
Pins 1-3
50
80
116
154
130
190
180
260
240
320
280
360
340
440
380
500
440
600
550
700
V_T
Volts
4
4
4
4
4
4
4
4
4
4
I_DRM
µAmps
5
5
5
5
5
5
5
5
5
5
I_S
mAmps
800
800
800
800
800
800
800
800
800
800
I_T
Amps
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
I_H
mAmps
50
150
150
150
150
150
150
150
150
150
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For individual “AA”, “AB”, and “AC” surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM.
• V_S is measured at 100 V/µs.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
Surge Ratings in Amps
0.2x310 * 2x10 * 8x20 *
0.5x700 ** 2x10 ** 1.2x50 **
10x160 *
10x160 **
I_PP
10x560 *
10x560 **
5x320 *
9x720 **
10x360 * 10x1000 * 5x310 * I_TSM
10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz
di/dt
Amps Amps Amps
Amps
Amps Amps Amps
Amps
Amps Amps Amps/µs
A
20
150
150
90
50
75
75
45
75
20
500
B
25
250
250
150
100
100
125
80
100
30
500
C
50
500
400
200
150
200
175
100
200
50
500
* Current waveform in µs
** Voltage waveform in µs
Telecom Design Guide • © 2006 Littelfuse
3 - 45
www.littelfuse.com