P0084UCMCL Datasheet, PDF (1/3 Pages) Littelfuse – Multiport MicroCapacitance

Multiport MicroCapacitance (MC) SIDACtor® Device
RoHS
The multiport MC line protector is an integrated, multichip solution used for protecting
1
6 _{multiple twisted pair from overvoltage conditions. It is intended for applications}
(R₁)
(T₂) _{sensitive to load values. Typically, high speed connections require lower capacitance.}
2
5 ^CO ^{values for the MC devices are 40% lower than standard UC devices.}
(G₁)
(G₂) _{This six-pin surface mount SOIC is equivalent to four discrete DO-214AA, which}
makes it ideal for densely populated, high-speed line cards that cannot tolerate PCB
3
(T₁)
4
(R₂)
inefficiencies nor the use of series power resistors. Surge current ratings up to 500 A
are available.
SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU
K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).
Electrical Parameters
Part
Number *
P0084UCMCL
P0304UCMCL
P0644UCMCL
P0724UCMCL
P0904UCMCL
P1104UCMCL
P1304UCMCL
P1504UCMCL
P1804UCMCL
P2304UCMCL
P2604UCMCL
P3104UCMCL
P3504UCMCL
V_DRM
Volts
V_S
Volts
Pins 1-2, 3-2, 4-5, 6-5
6
25
25
40
58
77
65
88
75
98
90
130
120
160
140
180
170
220
190
260
220
300
275
350
320
400
V_DRM
Volts
V_S
Volts
Pins 1-3, 4-6
12
50
50
80
116
154
130
176
150
196
180
260
240
320
280
360
340
440
380
520
440
600
550
700
640
800
V_T
Volts
4
4
4
4
4
4
4
4
4
4
4
4
4
I_DRM
µAmps
5
5
5
5
5
5
5
5
5
5
5
5
5
I_S
mAmps
800
800
800
800
800
800
800
800
800
800
800
800
800
I_T
Amps
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
I_H
mAmps
50
50
150
150
150
150
150
150
150
150
150
150
150
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number.
For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM.
• V_S is measured at 100 V/µs.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
Surge Ratings in Amps
0.2x310 * 2x10 * 8x20 *
0.5x700 ** 2x10 ** 1.2x50 **
10x160 *
10x160 **
I_PP
10x560 *
10x560 **
5x320 *
9x720 **
10x360 * 10x1000 * 5x310 * I_TSM
10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz
di/dt
Amps Amps Amps
Amps
Amps Amps Amps
Amps
Amps Amps Amps/µs
C
50
500
400
200
150
200
175
100
200
50
500
* Current waveform in µs
** Voltage waveform in µs
Telecom Design Guide • © 2006 Littelfuse
3 - 37
www.littelfuse.com