P0084UCMC Datasheet, PDF (1/2 Pages) Littelfuse – Multiport MicroCapacitance (MC) SIDACtor Device

Multiport MicroCapacitance (MC) SIDACtor Device
Multiport MicroCapacitance (MC)
SIDACtor Device
The multiport MC line protector is an integrated, multichip solution for protecting
1
6 _{multiple twisted pair from overvoltage conditions. It is intended for applications}
(R₁)
(T₂) _{sensitive to load values. Typically, high speed connections require lower capacitance.}
2
5 ^CO ^{values for the MC devices are 40% lower than standard UC devices}
(G₁)
(G₂) _{Based on a six-pin surface mount SOIC package, it is equivalent to four discrete DO-}
3
4 214AA or two TO-220 packages, which makes it ideal for densely populated, high-
(T₁)
(R₂) _{speed line cards that cannot afford PCB inefficiencies or the use of series power}
resistors. Surge current ratings up to 500 A are available.
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089,
ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).
Electrical Parameters
Part
Number *
P0084UC MC
P0304UC MC
P0644UC MC
P0724UC MC
P0904UC MC
P1104UC MC
P1304UC MC
P1504UC MC
P1804UC MC
P2304UC MC
P2604UC MC
P3104UC MC
P3504UC MC
V_DRM
Volts
V_S
Volts
Pins 1-2, 3-2, 4-5, 6-5
6
25
25
40
58
77
65
88
75
98
90
130
120
160
140
180
170
220
190
260
220
300
275
350
320
400
V_DRM
Volts
V_S
Volts
Pins 1-3, 4-6
12
50
50
80
116
154
130
176
150
196
180
260
240
320
280
360
340
440
380
520
440
600
550
700
640
800
V_T
I_DRM
I_S
I_T
I_H
C_O
Volts µAmps mAmps Amps mAmps pF
4
5
800
2.2
50
30
4
5
800
2.2
50
30
4
5
800
2.2
150
30
4
5
800
2.2
150
30
4
5
800
2.2
150
30
4
5
800
2.2
150
25
4
5
800
2.2
150
25
4
5
800
2.2
150
25
4
5
800
2.2
150
20
4
5
800
2.2
150
20
4
5
800
2.2
150
20
4
5
800
2.2
150
20
4
5
800
2.2
150
20
* For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I_PP applies to -40 °C through +85 °C temperature range.
• I_PP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V_DRM is measured at I_DRM.
• V_S is measured at 100 V/µs.
• Special voltage (V_S and V_DRM) and holding current (I_H) requirements are available upon request.
• Off-state capacitance (C_O) is measured at 1 MHz with a 2 V bias.
Surge Ratings
Series
C
I_PP
2x10 µs
Amps
500
I_PP
8x20 µs
Amps
400
I_PP
10x160 µs
Amps
200
I_PP
10x560 µs
Amps
150
I_PP
10x1000 µs
Amps
100
I_TSM
60 Hz
Amps
50
di/dt
Amps/µs
500
http://www.littelfuse.com
[phone]
2 - 24
© 2004 Littelfuse, Inc.
SIDACtor^® Data Book and Design Guide