MINISMDC200F Datasheet, PDF (1/2 Pages) Littelfuse – Specification Status: Released

PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: miniSMDC200F/16
DOCUMENT: SCD28400
REV LETTER: B
REV DATE: JULY 26, 2016
PAGE NO.: 1 OF 2
Specification Status: Released
Maximum Electrical Rating
Voltage: 16VDC
Short Circuit Current: 40A
Notes:
1. All terminations are tin plated.
2. Drawing not to scale
Marking:
TABLE I. DIMENSIONS:
A
B
C
D
E
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
mm: _4.37
4.73
0.51
1.22
3.07
3.41
0.25
0.95
0.20
in: (0.172) (0.186) (0.020) (0.048) (0.121) (0.134) (0.010) (0.040) (0.008)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
TIME TO
TRIP**
AMPERES
AT 0°C
HOLD TRIP
2.40 5.20
AMPERES
AT 25°C
HOLD TRIP
2.00 4.00
AMPERES
AT 60°C
HOLD TRIP
1.40 2.80
SECONDS
AT 25°C, 8.0A
MAX
5.0
RESISTANCE
VALUES
OHMS
AT 25°C
MIN MAX*
0.020 0.085
TRIPPED-STATE
POWER
DISSIPATION**
WATTS AT
25°C, 16V
MAX
1.2
* Maximum resistance is measured 1 hour after reflow.
** Values Specified were determined using PCB’s with 0.070”X1.5 ounce copper traces.
Agency Recognition:
Reference Document:
Precedence:
Effectivity:
CAUTION:
UL, TÜV
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
Halogen Free*
HF
* Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm.
© 2016 Littelfuse,Inc
Specifications are subject to change without notice.
Revised July 26, 2016
Littelfuse.com