MBRF20200CTR Datasheet, PDF (1/3 Pages) Littelfuse – Low forward voltage drop

Schottky Barrier Rectifier
MBRF20200CTR, 2x 10A, 200V, ITO-220AB, Common Anode
MBRF20200CTR
RoHS Pb
Heat sink
Common
Cathode
Pin out
1
Anode
3
Anode
Pinout 1
D2-PAK & D-PAK
Common Cathode
Cathode
Common
Anode
Cathode
1
2
3
Pinout 4
ITO-220AB
Common Anode
Maximum Ratings
Description
Heat sink
Common
Cathode
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
1
Anode
Com² mon
Cathode
3
Anode
diodes. ₁
2
3
Anode ^Common Anode
Features ^Cathode
Pinout 2
TO-220AB
Common Cathode
• High junction
temperatur^Peⁱⁿc^oa^up^t a³bility
ITO-220AB
• Guard r_Cin_og_mmfo_or_ne_Cn_ah_tha_on_dc_eed
ruggedness and long
• H igh frequency operation
• C ommon anode
configuration in
electrically isolated ITO-
term reliability
Heat sink
Cat^•hod^Le^{ow forward voltage drop}
220AB package
Applications
Cathode
1
• Switching mode power
sup^Ap^noly^de
2
• Free-wheeling diodes
Pinout 5
TO-220AC
• DC/DC converters
• Polarity protection diodes
Parameters
Peak Inverse Voltage
Average Forward Current
Peak Repetitive Forward
Current(per leg)
Peak One Cycle Non-Repetitive Surge
Current (per leg)
Symbol
V_RWM
I_F(AV)
I_FRM
I_FSM
Test Conditions
-
50% duty cycle @T_C = 105°C,
rectangular wave form
Rated V_R, Square wave,20KHz,
@T_C=90°C
8.3 ms, half Sine pulse
Max
200
10(per leg)
20(per device)
20
150
Unit
V
A
A
A
Electrical Characteristics
Parameters
Forward Voltage Drop (per leg) *
Reverse Current at DC condition (per leg)
Reverse Current (per leg) *
Junction Capacitance (per leg)
Series Inductance (per leg)
Voltage Rate of Change
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Symbol
V_F1
V_F2
I_R1
I_R2
C_T
L_S
dv/dt
V_ISO
Test Conditions
@ 10A, Pulse, T_J = 25 °C
@ 10A, Pulse, T_J = 125 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 125 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Measured lead to lead 5 mm from package body
Clip mounting, the epoxy body away from the
heatsink edge by more than 0.110” along the
lead direction.
Clip mounting, the epoxy body is inside the
heatsink.
Screw mounting, the epoxy body is inside the
heatsink.
Max
0.95
0.85
1.0
50
300
8.0
10,000
4500
3500
1500
Unit
V
mA
pF
nH
V/μs
V
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15