MBRF20150CT Datasheet, PDF (1/3 Pages) KEC(Korea Electronics) – SWITCHING TYPE POWER SUPPLY APPLICATION CONVERTER & CHOPPER APPLICATION

nk
ommon
athode
3
Anode
1
-PAK
thode
mmon
de
Cathode
3
4
AB
node
Schottky Barrier Rectifier
MBRF20150CT, 2x 10A, 150V, ITO-220AB, Common Cathode
MBRF20150CT
RoHS Pb
Pin out
Heat sink
Common
Cathode
1
Anode
Com² mon
Cathode
3
Anode
Pinout 2
TO-220AB
Common Cathode
Maximum Ratings
1
2
3
Anode ^Common Anode
Cathode
Pinout 3
ITO-220AB
Common Cathode
Hea^Pt^as^ri^an^mk ^eters
Peak In_Cv_ae_thr_os_de_e Voltage
Average Forward Current
Peak On_Ce_atC_hoy_dc_ele Non-Re_Ap_ne_ot_di_etive Surge
Current (per leg)
1
2
Electrical C_Ph_ina_or_ua_tc₅teristics
TO-220AC
Parameters
Forward Voltage Drop (per leg) *
Reverse Current at DC condition (per leg)
Reverse Current (per leg) *
Junction Capacitance (per leg)
Symbol
V_RWM
I_F(AV)
I_FSM
Symbol
V_F1
V_F2
I_R1
I_R2
C_T
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
V_ISO
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Description
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
diodes.
Features
• High junction
temperature capability
• Guard ring for enhanced
ruggedness and long
term reliability
• Low forward voltage drop
• H igh frequency operation
• C ommon cathode
configuration in
electrically isolated ITO-
220AB package
Applications
• Switching mode power
supply
• Free-wheeling diodes
• DC/DC converters
• Polarity protection diodes
Test Conditions
-
50% duty cycle @T_C = 100°C,
rectangular wave form
8.3 ms, half Sine pulse
Max
150
10(per leg)
20(per device)
150
Unit
V
A
A
Test Conditions
@ 10A, Pulse, T_J = 25 °C
@ 10A, Pulse, T_J = 125 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 125 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Clip mounting, the epoxy body away from the
heatsink edge by more than 0.110” along the
lead direction.
Clip mounting, the epoxy body is inside the
heatsink.
Screw mounting, the epoxy body is inside the
heatsink.
Max
0.90
0.80
1.0
6.0
150
4500
3500
1500
Unit
V
mA
pF
V
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15