MBRF20100CTP Datasheet, PDF (1/3 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – SCHOTTKY RECT

mon
ode
3
Anode
AK
ode
on _Cathode
3
de
Schottky Barrier Rectifier
MBRF20100CTP, 2x 10A, 100V, ITO-220AB, Common Cathode
MBRF20100CTP
RoHS Pb
Pin out
Heat sink
Common
Cathode
1
Anode
Com² mon
Cathode
3
Anode
Pinout 2
TO-220AB
Common Cathode
Maximum Ratings
1
2
3
Anode ^Common Anode
Cathode
Pinout 3
ITO-220AB
Common Cathode
Parameters
H_Pe_ea_at_ksi_In_nvk_{erse Voltage}
Cathode
Average Forward Current
Symbol
V_RWM
I_F(AV)
Peak One Cycle Non-Repetitive Surge
Cathod^Ce^{urrent (pe}A^rno^led^ge ⁾
I_FSM
1
2
Electrica_Pl _iC_noh_ua_t r₅acteristics
TO-220AC
Parameters
Forward Voltage Drop (per leg) *
Reverse Current at DC condition (per leg)
Reverse Current (per leg) *
Junction Capacitance (per leg)
Typical Series Inductance (per leg)
Voltage Rate of Change
Symbol
V_F1
V_F2
I_R1
I_R2
C_T
L_S
dv/dt
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
V_ISO
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Description
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
diodes.
Features
• High junction
temperature capability
• Guard ring for enhanced
ruggedness and long
term reliability
• Low forward voltage drop
• H igh frequency operation
• C ommon cathode
configuration in
electrically isolated ITO-
220AB package
Applications
• Switching mode power
supply
• Free-wheeling diodes
• DC/DC converters
• Polarity protection diodes
Test Conditions
-
50% duty cycle @T_C = 105°C,
rectangular wave form
8.3 ms, half Sine pulse
Max
100
10 (per leg)
20 (total device)
150
Unit
V
A
A
Test Conditions
@ 10A, Pulse, T_J = 25 °C
@ 10A, Pulse, T_J = 125 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 125 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Measured lead to lead 5 mm from package body
Clip mounting, the epoxy body away from the
heatsink edge by more than 0.110” along the lead
direction.
Clip mounting, the epoxy body is inside the
heatsink.
Screw mounting, the epoxy body is inside the
heatsink.
Max
0.90
0.80
1
6
250
8.0
10,000
4500
3500
1500
Unit
V
mA
pF
nH
V/μs
V
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15