MBRF1060CTL Datasheet, PDF (1/3 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – SCHOTTKY RECTIFIER

Schottky Barrier Rectifier
MBRF1060CTL 2x 5A, 60V, ITO-220AB Common Cathode
MBRF1060CTL
RoHS Pb
Description
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
diodes.
n
de
Cathode
Pin out
Heat sink
Common
Cathode
1
Anode
Com² mon
Cathode
3
Anode
Pinout 2
TO-220AB
Common Cathode
1
2
3
Anode ^Common Anode
Cathode
Pinout 3
ITO-220AB
Common Cathode
Maxi_Hm_eu_atm_sinR_katings
Cath_Pod_ae_rameters
Peak Inverse Voltage
CathoAdeverage ForAwnoadred Current
P¹eak One Cycle²Non-Repetitive Surge
Pinout^C5^{urrent (per leg)}
TO-220AC
Electrical Characteristics
Symbol
V_RWM
I_F(AV)
I_FSM
Features
• High junction
temperature capability
• Guard ring for enhanced
ruggedness and long
term reliability
• Low forward voltage drop
• H igh frequency operation
• Common cathode
configuration in
electrically isolated ITO-
220AB package
Applications
• S witching mode power
supply
• F ree-wheeling diodes
• DC/DC converters
• Polarity protection diodes
Test Conditions
-
50% duty cycle @T_C = 75°C,
rectangular wave form
8.3ms,half Sine pulse
Max
60
5 (per leg)
10 (total device)
125
Unit
V
A
A
Parameters
Forward Voltage Drop (per leg) *
Reverse Current (per leg) *
Junction Capacitance (per leg)
Typical Series Inductance (per leg)
Voltage Rate of Change
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Symbol
V_F1
V_F2
I_R1
I_R2
C_T
L_S
dv/dt
V_ISO
Test Conditions
@ 5A, Pulse, T_J = 25 °C
@ 5A, Pulse, T_J = 100 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 100 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Measured lead to lead 5 mm from package body
Clip mounting, the epoxy body away from the
heatsink edge by more than 0.110” along the
lead direction.
Clip mounting, the epoxy body is inside the
heatsink.
Screw mounting, the epoxy body is inside the
heatsink.
Max
0.60
0.55
1.0
15
220
8.0
10,000
4500
3500
1500
Unit
V
mA
pF
nH
V/μs
V
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15