MBRF10200CT Datasheet, PDF (1/3 Pages) KEC(Korea Electronics) – SCHOTTKY BARRIER TYPE DIODE

Schottky Barrier Rectifier
MBRF10200CT, 2x 5A, 200V, ITO-220AB, Common Cathode
MBRF10200CT
RoHS Pb
Description
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
diodes.
Features
Pin out
Heat sink
Common
Cathode
• High junction
temperature capability
• Guard ring for enhanced
ruggedness and long
term reliability
• Low forward voltage drop
• H igh frequency operation
• Common cathode
configuration in
electrically isolated ITO-
220AB package
1
Anode
Com² mon
Cathode
3
Anode
1
2
3
Anode ^Common Anode
Cathode
Pinout 2
TO-220AB
Common Cathode
Pinout 3
Maximum Ratings_{ComITmOo-n22C0aAthBode}
Applications
• Switching mode power
supply
• Free-wheeling diodes
• DC/DC converters
• Polarity protection diodes
Heat sink ^Parameters
Symbol
Test Conditions
Max
Unit
Peak Inverse Voltage
Cathode
V_RWM
-
200
V
hode
Average Forward Current
I_F(AV)
50% duty cycle @T_C =105°C,
rectangular wave form
5 (per leg)
A
10 (total device)
Peak One Cycle Non-Repetitive Surge
Cathode _CurreA_nno_td₍e_{per leg)}
1
2
Electrical Characteristics
Pinout 5
TO-220AC
Parameters
I_FSM
Symbol
8.3 ms, half Sine pulse
Test Conditions
128
A
Max
Unit
Forward Voltage Drop (per leg) *
Reverse Current at DC condition (per leg)
Reverse Current (per leg) *
Junction Capacitance (per leg)
Typical Series Inductance (per leg)
Voltage Rate of Change
V_F1
V_F2
I_R1
I_R2
C_T
L_S
dv/dt
@ 5A, Pulse, T_J = 25 °C
@ 5A, Pulse, T_J = 125 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 125 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Measured lead to lead 5 mm from package body
0.98
0.78
1.0
7.0
150
8.0
10,000
V
mA
pF
nH
V/μs
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Clip mounting, the epoxy body away from the
heatsink edge by more than 0.110” along the
lead direction.
4500
V_ISO
Clip mounting, the epoxy body is inside the
heatsink.
3500
V
Screw mounting, the epoxy body is inside the
heatsink.
1500
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15