MBRF10150CTL Datasheet, PDF (1/3 Pages) Sangdest Microelectronic (Nanjing) Co., Ltd – SCHOTTKY RECTIFIER

on
e
3
ode
K
e
Cathode
3
Schottky Barrier Rectifier
MBRF10150CTL, 2x 5A, 150V, ITO-220AB, Common Cathode
MBRF10150CTL
RoHS Pb
Description
Littelfuse MBR series Schottky Barrier Rectifier is
designed to meet the general requirements of commercial
applications by providing high temperature, low leakage
and low V_F products.
It is suitable for high frequency switching mode power
supply, free-wheeling diodes and polarity protection
diodes.
Features
Hea^Ptⁱⁿsin^ok^ut
Common
Cathode
• High junction
temperature capability
• Guard ring for enhanced
ruggedness and long
term reliability
• Low forward voltage drop
• H igh frequency operation
• C ommon cathode
configuration in
electrically isolated ITO-
220AB package
1
Anode
Com² mon
Cathode
3
Anode
1
2
3
Anode ^Common Anode
Cathode
Pinout 2
TO-220AB
Common Cathode
Maximum Ratings
Pinout 3
ITO-220AB
Common Cathode
Applications
• Switching mode power
supply
• Free-wheeling diodes
• DC/DC converters
• Polarity protection diodes
Parameters
Heat sink
Peak Inverse Voltage
Cathode
Average Forward Current
Peak One Cycle Non-Repetitive
C_Sa_uth_rgod_ee _{Current (p}A_eno_rd_le_eg)
1
2
Symbol
V_RWM
I_F(AV)
I_FSM
Test Conditions
-
50% duty cycle @T_C = 100°C, rectangular wave form
8.3 ms, half Sine pulse
Max
150
5 (per leg)
10 (total device)
138
Electric^Paⁱⁿl^oC^uh^{t 5}aracteristics
TO-220AC
Parameters
Forward Voltage Drop (per leg) *
Reverse Current at DC condition (per leg)
Reverse Current (per leg) *
Junction Capacitance (per leg)
Voltage Rate of Change
RSM Isolation Voltage
(t = 1.0 second, R. H. < =30%,
T_A = 25 °C)
* Pulse Width < 300μs, Duty Cycle <2%
Symbol
V_F1
V_F2
I_R1
I_R2
C_T
dv/dt
V_ISO
Test Conditions
@ 3A, Pulse, T_J = 25 °C
@ 5A, Pulse, T_J = 25 °C
@ 3A, Pulse, T_J = 125 °C
@ 5A, Pulse, T_J = 125 °C
@V_R = rated V_R T_J = 25 °C
@V_R = rated V_R T_J = 125 °C
@V_R = 5V, T_C = 25 °C f_SIG = 1MHz
Clip mounting, the epoxy body away from the heatsink
edge by more than 0.110” along the lead direction.
Clip mounting, the epoxy body is inside the heatsink.
Screw mounting, the epoxy body is inside the heatsink.
Max
0.87
0.93
0.67
0.73
1
7
200
10,000
4500
3500
1500
Unit
V
A
Unit
V
mA
pF
V/μs
V
©2015 Littelfuse, Inc
Specifications are subject to change without notice.
Revised:11/09/15