JBPT0001Z Datasheet, PDF (1/1 Pages) Littelfuse – 3/8 “ Pass Thru Stud Block

Junction Blocks
3/8 “ Pass Thru Stud Block
Specifications:
Voltage Rating:
Locknut Torque:
Body Mounting Nut Torque:
Materials:
Operating Temperature Range:
400A
54.2 Nm
13.6 Nm
Body-Nylon 66 (120˚C)
Contact - Copper 110
Studs - Zinc-plated steel
Locknut - Zinc-plated steel
Body nut - Nylon 66
Stud caps - PVC
-40˚C - 125˚C
Our 3/8” pass-thru stud has a high electrical rating and low
resistance due to a large cross-sectional contact area. It also
uses highly conductive materials to outperform the competition.
Dimensions in millimeters
This pass-thru stud boasts high installation torque values to allow
the use of large cable sizes for high current applications. Stud
caps are included to protect from accidental shorts.
The pass-thru stud is available with red or black body and stud
cap to help color-code circuits in the vehicle. A plastic body
locknut ensures quick and easy firewall-mount installation
without the need for additional hardware.
STUD CAPS
USED ON BOTH
SIDES OF BLOCK
Part
Number
JBPT0001Z
JBPT0002Z
Color
Red
Black
38.1
[1.50]
19.1
[0.75]
6.4
[0.25]
3/8-16 BOLTS
R16.7
[R0.66]
28.7
[1.13]
TYPICAL PANEL CUTOUT
38.1
[1.50]
PLASTIC BODY
LOCKNUT
3/8-16 NUT
USED ON BOTH
SIDES OF BLOCK
1
www.littelfuse.com
© 2009 Littelfuse • Automotive Circuit Protection Products