HVR250P080C Datasheet, PDF (1/2 Pages) Littelfuse – power contact and the natural lightning strike.

POLYFUSE^® RESETTABLE FUSES
No. HVR250
Devices are not intended for
continuous use at 250 V!
Dimensions (mm)
center-to-center
Figure 1
Figure 2
High Voltage
PTC Device, 60 V / 250 V
Standard
UL 1434 1^st Edition
CSA C22.2 No. 0 CSA TIL No. CA-3A
Approvals
cULus Recognition
TÜV
Features
This product line is designed to provide protec-
tion against induced AC power current, direct
power contact and the natural lightning strike.
The HVR250 product line is widely used in the
field of telecommunications and network-
ing, ISDN and XSDN equipment. It also helps
equipment manufacturers pass ITU K20, K21 and
telcordia requirements.
Specifications
Packaging
A:
F:
bulk
tape and ammo
Materials
Insulating Material: Yellow Epoxy Polymer,
UL 94 V-0
Round Pins:
Copper alloy, tin plated
Max. Device Surface Temperature in Tripped State
125 °C
Operating / Storage Temperature
-40 ºC to +85 ºC (consider de-rating)
Humidity Ageing
+85 °C, 85 % R.H., 1000 hours, ± 5 % typical
resistance change
Soldering Characteristics
Solderability per MIL-STD-202, Method 208E
Thermal Shock
MIL-STD-202F, Method 107G
+125 °C to -40 °C 10 times,
±10 % typical resistance change
Solvent Resistance
MIL-STD-202, Method 215F, no change
Marking
“P”, voltage, amperage rating, lot number
Dimensions (mm)
Model
Fig.
A
B
C
Max
Max
typ
D
E
Min
Max
Physical Characteristics
Lead Material
packaging quantity
bag ammo
HVR250P080C
1
5,8
10,9
5,5
4,7
5,1
HVR250P080U
1
5,0
9,0
3,8
4,7
5,1
HVR250P080CF
1
5,8
10,9
5,5
4,7
5,1
HVR250P110U
1
5,3
9,4
3,8
4,7
5,1
HVR250P120C
2
6,8
12,5
5,5
4,7
5,1
HVR250P120U
2
6,0
10,0
3,8
4,7
5,1
HVR250P120C-RA 2
6,8
12,5
5,5
4,7
5,1
HVR250P120C-RC 2
6,8
12,5
5,5
4,7
5,1
HVR250P120C-RF 2
6,8
12,5
5,5
4,7
5,1
HVR250P120C-R1 2
6,8
12,5
5,5
4,7
5,1
HVR250P120C-R2 2
6,8
12,5
5,5
4,7
5,1
HVR250P120C-R3 2
6,8
12,5
5,5
4,7
5,1
HVR250P120CT
2
6,8
12,5
5,5
4,7
5,1
HVR250P145C
2
6,8
12,5
5,5
4,7
5,1
HVR250P145U
2
6,0
12,5
3,8
4,7
5,1
HVR250P145C-RA 2
6,8
10,0
5,5
4,7
5,1
HVR250P145C-RB 2
6,8
12,5
5,5
4,7
5,1
HVR250P145CT
2
6,8
12,5
5,5
4,7
5,1
HVR250P180C
2
12,5
12,9
5,5
4,7
5,1
HVR250P180U
2
10,4
12,6
3,8
4,7
5,1
HVR250P180CF
1
12,0
13,2
5,5
4,7
5,1
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
0.65 dia
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
500
1500
500
1500
500
1500
500
1500
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
500
1200
200
1000
200
1000
200
1000
Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF).
Model
I_hold
I_Trip
V_{max. ac} I_max. max. time to trip
P_{d max.}
(A)
V_int/V_op* (A)
(s @ A)
(W)
Resistance
R _min.(Ω) R _max.(Ω) R_{I max.}(Ω)
Approvals
HVR250P080C
HVR250P080U
HVR250P080CFT
HVR250P110U
HVR250P120C
HVR250P120U
HVR250P120C-RA
HVR250P120C-RC
HVR250P120C-RF
HVR250P120C-R1
HVR250P120C-R2
HVR250P120C-R3
HVR250P120CT
HVR250P145C
HVR250P145U
HVR250P145C-RA
HVR250P145C-RB
HVR250P145CT
HVR250P180C
HVR250P180U
HVR250P180CF
0.080
0.080
0.080
0.110
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.145
0.145
0.145
0.145
0.145
0.180
0.180
0.180
0.16
250/60
3
0.16
250/60
3
0.16
250/60
3
0.22
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.24
250/60
3
0.29
250/60
3
0.29
250/60
3
0.29
250/60
3
0.29
250/60
3
0.29
250/60
3
0.65
250/60
3
0.65
250/60
10
0.65
250/60
3
3.00 @ 0.35**
3.00 @ 0.35**
3.00 @ 0.35**
0.75 @ 1.00
1.50 @ 1.00
1.00 @ 1.00
0.90 @ 1.00
0.85 @ 1.00
0.70 @ 1.00
0.80 @ 1.00
0.70 @ 1.00
1.00 @ 1.00
0.70 @ 1.00
2.50 @ 1.00
2.00 @ 1.00
2.50 @ 1.00
2.00 @ 1.00
2.00 @ 1.00
21.00 @ 1.00
15.00 @ 1.00
21.00 @ 1.00
1.00
14.0
22.0
33
••
1.00
15.0
22.0
33
••
1.00
14.0
22.0
33
p•
1.00
5.0
9.0
16
pp
1.00
4.0
8.0
16
••
1.00
6.0
10.0
16
••
1.00
7.0
9.0
16
••
1.00
5.4
7.5
14
••
1.00
6.0
10.5
16
••
1.00
6.0
9.0
16
••
1.00
8.0
10.5
16
••
1.00
8.0
10.0
16
••
1.00
7.0
12.0
16
••
1.00
3.0
6.0
14
••
1.00
3.5
6.5
14
••
1.00
3.0
5.5
12
••
1.00
4.5
6.0
14
••
1.00
5.4
7.5
14
••
1.80
0.8
2.0
4
••
1.80
0.8
2.0
4
••
1.80
0.8
2.2
4
p•
* V_int :Interrupt Voltage V_op : Operating Voltage(Vcd)
** typcial value
NOTE:
I _hold =
I _trip =
I _max =
Hold current: maximum current device will pass without tripping in 20 °C still air.
Trip current: minimum current at which the device will trip in 20 °C still air.
Maximum fault current device can withstand without damage at rated voltage (V_max)
Order
Qty.
Order-
Model
Information
Number
P_d = Power dissipated from device when in the tripped state at 20 °C still air.
R _min= Minimum resistance of device in initial (un-soldered) state.
R = _1max Maximum resistance of device at 20 °C measured one hour after tripping for 20 s.
Caution:Operation beyond the specified rating may result in damage and possible arcing and flame.
Packaging
Specifications are subject
to change without notice.
040706
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
www.littelfuse.com