830 Datasheet, PDF (1/1 Pages) Littelfuse – PC Mount, Shocksafe 5x20mm Fuses

MINIATURE FUSEHOLDERS
Holder / No. 830
PC Mount, Shocksafe
5x20mm Fuses
max. 0,2 5,5
Bayonet-joint
32
Horizontal / 3-Pin
12,7 7,62
Stud
Holes in printed circuit board: 1,3 + 0,1
Cap / No. 835
Fuse carrier inserted
Printed circuit board
Stud
0,5
∅2 -0,05
1,8
1,1
12,7 7,62
5,08
Bayonet-connector-nose
max. 20,6
1,5
Flush Mount Type
1,2
Slot for screwdriver
Cap / No. 837
Finger Grip Type
Bayonet-connector-nose
max. 29,6
1,5
1,2
Slot for screwdriver
Order Information
Packaging
Bulk (100 pcs.)
Order Numbers
Holder
No. 830 0000 000
Cap, Flush Mount No. 835 0000 000
Cap, Finger Grip No. 837 0000 000
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Specifications
Standard
IEC 60127-6
UL 512
CSA C22.2. No.39
Approvals (only 830/835)
VDE: License No. 120623
SEMKO: Certificate No. 9850022
UL Recognized: File No. E 70164
CSA Certified: File No. 47574
Mounting
(3) Solder pins 0.5mm x 1.1mm and plastic stud.
The pins spaced at 5.08mm form a common
connection.
Protection Class & Category
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
Materials
Holder/Cap:
Metal Parts:
Terminals:
Black Thermoplastic
Polyamide PA 6.6, UL94 V-0
Copper alloy,
corrosion protected
Solderable, tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO)
16A (UL/CSA)
Rated Power: 1.6W (VDE/SEMKO)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Contact Resistance
≤ 5mΩ
Dielectric Strength
> 1.5 kV
Impulse Voltage
4 kV, 50 Hz, 1 min., dry
Insulation Resistance
> 10³ MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section
Conducting path - 0.2mm²
Marking
830, 250V, Approvals
Unit Weight
4.4g (Holder) / 1.6g (835) / 2.2g (837)
050906
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com