821 Datasheet, PDF (1/1 Pages) Littelfuse – Panel Mount , for 5x20mm Fuses

MINIATURE FUSEHOLDERS
Holder / No. 821 ^{Panel Mount ,}
for 5x20mm Fuses
Einsatzträger eingesetzt
ø15
fuse-carrier inserted
Renkverschluß
bayonet-joint
Specifications
Packaging
0 bulk (100 pcs.)
Überstand
distance
Standard
IEC 60127-6
UL 512
CSA C22.2. No.39
Approvals
11,7 -0,15
12 -0,1
Cap / No. 835
ø16
R1
4,8±0,1
Gerätewand
panel mounting
M12,7x1,5(P0,75)
SW14
4,45
0,5
P.
7,62±0,1
Schlitz für Schraubendreher
Slot for screw-driver
Renkverschlußnase
Ø 9,2
Bayonet-connector-nose
Flush Mount Type
Cap / No. 837
7
Schlitz für Schraubendreher
Ø 9,2
Slot for screw-driver
Renkverschlussnase
Bayonet-connector-nose
7
Finger Grip Type
Order Info
Qty.
Order
Series
Packaging
Number
0000 00
0
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Mounting
12.7mm diameter D-hole or double D-hole
(panel 1mm - 4.5mm)
Admissible torque on plastic hex nut is 1.2Nm
Te r m i n a l s
Solderable or 4.8mm quick connect - fits 0.5mm
tab
Protection Class & Category
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
Materials
Holder/Cap: Thermoplastic
Polyamide PA 6.6, UL94 V-0, black
Metal Parts: Copper alloy, corrosion
protected
Terminals: solderable, tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO)
16A (UL/CSA)
Rated Power : 4W (SEMKO)
2.5W (VDE)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Contact Resistance
≤ 5mΩ
Dielectric Strength
> 1.5 kV
Impulse Voltage
4 kV with 1,2µs/50µs
Insulation Resistance
> 10 MΩ (500VDC, 1 min.)
Solderability
235 ºC, 2 sec. (soldering bath) (IEC 60068-2-20)
350 ºC, 3 sec. (soldering iron) (IEC 60068-2-20)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section
Conductor - 2.5mm²
Marking
821, 250V, Approvals
Unit Weight
4.0g (821) / 1.6g (835) / 2.2g (837)
Specifications are subject
to change without notice
050906
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com