810 Datasheet, PDF (1/1 Pages) Littelfuse – PC Mount, Shocksafe 5x20mm / 6.3x32mm Fuses

MINIATURE FUSEHOLDERS
Holder / No. 810
shock-safe
PC Mount, Shocksafe
5x20mm / 6.3x32mm Fuses
max. 0,2 5,5
Bayonet-joint
45,7
Horizontal / 3-Pin
Stud 27,94
7,62
Holes in the printed circuit board: 1,3 +0,1
Cap / No. 815
Fuse carrier inserted
Printed circuit board
Stud
∅2 -0,05
0,5
27,94
7,62 ^1,9
1,1
Slot for screwdriver
Bayonet-connector-nose
For 5x20mm Fuses
1,5 _{max. 34}
1,2
Cap / No. 816
Slot for screwdriver
Bayonet-connector-nose
For 6.3x32mm Fuses
1,5 _{max. 33,8}
1,2
Order Information
Packaging
Bulk (100 pcs.)
Order Numbers
Holder
Cap, 5x20mm
Cap, 6.3x32mm
No. 810 0000 000
No. 815 0000 000
No. 816 0000 000
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Specifications
Standard
IEC 60127-6
UL 512
CSA C22.2. No.39
Approvals
VDE: License No. 118611
SEMKO: Certificate No. 9932039
UL Recognized: File No. E 70164
CSA Certified: File No. 47574
Mounting
(3) Solder pins 0.5mm x 1.1mm and plastic stud
The pins spaced at 5.08mm form a common
connection.
Protection Class & Category
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
Materials
Holder/Cap:
Metal Parts:
Terminals:
Black Thermoplastic
Polyamide PA 6.6, UL94 V-0
Copper alloy,
corrosion protected
Solderable, tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO)
16A (UL/CSA)
Rated Power : 2.5W (VDE/SEMKO)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Contact Resistance
≤ 5mΩ
Dielectric Strength
> 1.5 kV
Impulse Voltage
4 kV, 50 Hz, 1 min., dry
Insulation Resistance
> 10³ MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section
Conducting path - 0.2mm²
Marking
810, 250V, Approvals
Unit Weight
5.4g (Holder) / 2.5g (Cap)
050906
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com