652 Datasheet, PDF (1/1 Pages) Littelfuse – MINIATURE FUSEHOLDERS

MINIATURE FUSEHOLDERS
Holder / No. 652
Not for new designs - refer to No. 852 and 853
PC Mount, Shocksafe
5x20mm Fuses
∅ 12,3
Fuse carrier inserted
No. 653
Specifications
Standard
IEC 60127-6
UL 512
CSA C22.2. No.39
Approvals
VDE: License No. 92599
SEMKO: Certificate Nos. 9533178/9635055
UL Recognized: File No. E 70164
CSA Certified: File No. 47574
Vertical / 2-Pin
10 + 0,1
Holes in the printed circuit board: 1,3 + 0,1
Cap / No. 653
Printed circuit board 0,5
10
Flush Mount Type
Design 07: without silicon washer (IP 40)
Design 04: with silicon washer (IP 54)
between holder and cap
Cap / No. 655
1
16
Finger Grip Type
Design 07: without silicon washer (IP 40)
Design 04: with silicon washer (IP 54)
between holder and cap
1
20,4
Order Information
Packaging
Bulk (100 pcs.)
Order Numbers
Holder
No. 652 0000 040
Cap, Flush Mount, IP 40 No. 653 0000 070
Cap, Flush Mount, IP 54 No. 653 0000 040
Cap, Finger Grip, IP 40 No. 655 0000 070
Cap, Finger Grip, IP 54 No. 655 0000 040
Specifications are subject
to change without notice
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Mounting
(2) Solder pins 0.5mm x 1.1mm
Protection Class & Category
IP 40 (with Cap 653 07 & 655 07 acc. to IEC 60529)
IP 54 (with Cap 653 04 & 655 04 acc. to IEC 60529)
PC2 (IEC 60127-6)
Materials
Holder/Cap: Black Thermoplastic
Polyamide PA 6.6, UL94 V-0
Sealing Washer: Silicon (Cap 653 04 & 655 04)
Metal Parts: Copper alloy,
corrosion protected
Terminals: Solderable, tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO)
16A (UL/CSA)
Rated Power: 2.5W (VDE/SEMKO)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Contact Resistance
≤ 5mΩ
Dielectric Strength
> 1.5 kV
Impulse Voltage
4 kV, 50 Hz, 1 min., dry
Insulation Resistance
> 10³ MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section
Conducting path - 0.2mm²
Marking
652, 250V, Approvals
Unit Weight
3.8g (Holder) / 2.0g (653) / 2.4g (655)
050906
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com