601 Datasheet, PDF (1/1 Pages) Littelfuse – MINIATURE FUSEHOLDERS

MINIATURE FUSEHOLDERS
Holder / No. 601 ^{Panel Mount, Shocksafe}
Not for new designs - refer to No. 850 and 851 5x20mm Fuses
0,5
565
35,5
12,7 -0,1
Panel opening
Cap / No. 602
1...6
5,8 5
3,2
7,1
20
10,85
Design 00: without silicon washer (IP 40)
Design 04: with silicon washer (IP 54)
(from front side only)
Insulating cover for
terminals/ No. 522
Order Information
Packaging
Bulk (100 pcs.)
Order Numbers
Holder
No. 601 0000 000
Cap, without washer, IP 40 No. 602 0000 000
Cap, with washer, IP 64 No. 602 0000 040
Specifications are subject
to change without notice
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Specifications
Standard
IEC 60127-6
UL 512
CSA C22.2. No.39
Approvals
SEMKO: Certificate No. 9946019
UL Recognized: File No. E 70164
CSA Certified: File No. 47574
VDE Licence No. 132224
Mounting
12.7mm diameter D-hole
Admissible torque on plastic hex nut is 1.2Nm
Te r m i n a l s
Solderable or 2.8mm quick connect-fits 0.5mm tab
Protection Class & Category
IP 40 (with Cap 602 00 acc. to IEC 60529)
IP 54 (with Cap 602 04 acc. to IEC 60529)
PC2 (IEC 60127-6)
Materials
Holder:
Black Duroplast
Phenolplast PF, UL94 V-0
Cap:
Black Thermoplastic
Polyamide PA6.6, UL94 V-0
Sealing Washer: Novapress Multi (Cap 602 04)
Metal Parts: Copper alloy,
corrosion protected
Terminals: Solderable, tinned
Insulating cover: Polyvinyl chloride (Soft PVC),
black
Electrical Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (SEMKO/VDE)
16A (UL/CSA)
Rated Power : 4W (SEMKO/VDE)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
Dielectric Strength
> 1.5 kV
Impulse Voltage
4 kV, 50 Hz, 1 min., dry
Insulation Resistance
> 10³ MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Minimum Cross Section
Conductor - 2.5mm²
Marking
601, 250V, Approvals
Unit Weight
4.0g (Holder) / 1.9g (Cap) / 2.9g (Insulating
sleeve)
050908
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com