5KP5.0A Datasheet, PDF (1/4 Pages) Littelfuse – Silicon Avalanche Diodes - 5000 Watt Axial Leaded Transient Voltage Suppressor

Silicon Avalanche Diodes
5000 Watt Axial Leaded Transient Voltage Suppressor
RoHS _{5KP Series}
The 5KP Series is designed specifically to protect sensitive
electronics equipment from voltage transients induced by
lightning and othertransient voltage events. These devices are
ideal for the protection of I/O interfaces, Vcc bus and other
vulnerable circuits used in automotive, industrial and consumer
electronic applications.
FEATURES
• RoHS Compliant
• 5.0 to 220 Volts
• Glass passivated chip junction
• Uni-directional and Bi-directional
• 5000W Peak Pulse Power capability on 10/1000µs waveform
• Excellent clamping capability
• Repetition rate (duty cycle): 0.05%
• Low incremental surge resistance
• Fast response time: typically less than 1.0ps
from 0 Volts to BV
• Typical IR less than 1µA for VBR>=10V
• High temperature soldering guaranteed: 265˚C/10
seconds/.375"(9.5mm) lead length, 5lbs., (2.3kg) tension
Agency Approvals: Recognized under the Components
Program of Underwriters Laboratories.
Agency File Number: E128662
®
MAXIMUM RATINGS AND CHARACTERISTICS @25˚C
AMBIENT TEMPERATURE (unless otherwise noted)
RATING
SYMBOL
Peak Pulse Power Dissipation on
10/1000µs waveform(Note 1, FIG. 1)
PPPM
Peak Pulse Current of on 10/1000µs
waveform (Note 1, FIG. 3)
IPPM
Steady State Power Dissipation at
TL=75˚C, Lead lengths .375",
(9.5mm)(Note 2)
PM(AV)
VALUE
Min
5000
SEE
TABLE 1
8
UNIT
Watts
Amps
Watts
Peak Forward Surge Current, 8.3ms
Single Half Sine-Wave Superimposed ^IFSM
400
on Rated Load, (JEDEC Method)
(Note 3)
Operating junction and Storage
Temperature Range
Tj, TSTG -55 to +175
Amps
°C
ORDERING INFORMATION
5KP
CA
Voltage
Bi-Directional
5% Voltage Tolerance
Packaging Option
B = Bulk (500 pcs)
T = Tape and reeled (800 pcs)
298
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above
TA= 25˚C per Fig.2
2. Mounted on Copper Pad area of 0.8x0.8"(20x20mm)
per Fig.5.
3. 8.3 ms single half sine-wave, or equivalent square wave,
Duty cycle= 4 pulses per minutes maximum.
Mechanical Specifications:
Weight:
0.07 ounce, 2.1 gram
Case:
Molded plastic over glass
passivated junction
Mounting Position: Any
Polarity:
Color band denotes positive end
(cathode) except Bipolar
Terminal:
Plated Axial leads, solderable per
MIL-STD-750, Method 2026
www.littelfuse.com