5.0SMDJ64CA Datasheet, PDF (1/5 Pages) Littelfuse – Transient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series

Transient Voltage Suppression Diodes
Surface Mount – 5000W > 5.0SMDJ series
5.0SMDJ Series
RoHS _Pb
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(T_A=25^OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation at
T_A=25^OC by 10x1000µs waveform
P_PPM
5000
W
(Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat
sink at T_A=50^OC
P_M(AV)
6.5
W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
I_FSM
300
A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
V_F
only
5.0
V
Operating Junction and Storage
Temperature Range
T_J, T_STG -65 to 150 °C
Typical Thermal Resistance Junction
to Lead
R_uJL
15
°C/W
Typical Thermal Resistance Junction
to Ambient
R_uJA
75
°C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above T_A = 25^OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only,duty cycle=4 per minute maximum.
Description
The 5.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• Halogen-Free
• Fast response time:
• RoHS compliant
• For surface mounted
applications to optimize
board space
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low profile package
• Low incremental surge
• Built-in strain relief
resistance
• Typical maximum
temperature coefficient
• Typical I_R less than 5µA
above 22V
ΔV_BR = 0.1% x V_BR@25°C x ΔT
• Glass passivated chip
• High Temperature
soldering guaranteed:
junction
260°C/40 seconds at
terminals
• 5000W peak pulse power
capability at 10×1000μs ^{• Plastic package has}
waveform, repetition rate ^{Underwriters Laboratory}
(duty cycles):0.01%
Flammability 94V-O
• Matte Tin Lead–free Plated
Applications
TVS devices are ideal for the protection of I/O Interfaces,
V_CC bus and other vulnerable circuits used in Telecom,
Computer, Industrial and Consumer electronic applications.
5.0SMDJ Series
©2011 Littelfuse, Inc.
1
Revision: November 15, 2011, 16:49
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.