216050 Datasheet, PDF (1/2 Pages) Littelfuse – 5 x 20 mm Fast-Acting Fuse

Axial Lead and Cartridge Fuses
Designed to IEC Standard
5 x 20 mm Fast-Acting Fuse 216 Series
• Designed to International (IEC) Standards for use globally.
• Meets the IEC 60127-2, Sheet 1 specification for Fast Acting Fuses.
• Available in Cartridge and Axial Lead Form.
• Available in ratings of 0.050 to 10 amperes.
• High breaking capacity.
ELECTRICAL CHARACTERISTICS:
% of Ampere Ampere
Rating
Rating
Opening
Time
150%
.05 – 6.3
8-16
60 minutes, Minimum
30 minutes, Minimum
210%
275%
400%
1000%
.05 – 16
.05 – 4
5– 6.3
8-16
.05 – 6.3
8-16
.05 – 6.3
8-16
30 minutes, Maximum
0.01 sec., Min.; 2 sec. Max.
0.01 sec., Min.; 3 sec. Max.
0.04 sec., Min.; 20 sec. Max.
.003 sec., Min.; 0.3 sec. Max.
.01 sec., Min.; 1.0 sec. Max.
.02 seconds, Maximum
.03 seconds, Maximum
INTERRUPTING RATING:
0.05 - 10A
1500A @ 250 VAC, 0.7-0.8 power factor
ORDERING INFORMATION:
Cartridge
Catalog
Number
216.050
216.063
216.080
216.100
216.125
216.160
216.200
216.250
216.315
216.400
216.500
216.630
216.800
216 001
216 1.25
216 01.6
216 002
216 02.5
216 3.15
216 004
216 005
216 06.3
216 008
216 010
Ampere
Rating
.050
.063
.080
.100
.125
.160
.200
.250
.315
.400
.500
.630
.800
1
1.25
1.6
2
2.5
3.15
4
5
6.3
8*
10*
Voltage
Rating
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Nominal
Resistance
Cold Ohms
15.900
10.450
7.885
5.793
3.675
5.349
3.350
2.350
1.850
0.903
0.847
0.466
0.295
0.237
0.153
0.111
0.076
0.058
0.037
0.025
0.018
0.014
0.010
0.008
Nominal
Melting I²t
A² Sec.
0.00019
0.00054
0.00084
0.00450
0.00545
0.00576
0.00438
0.00891
0.015
0.036
0.169
0.179
0.288
0.180
0.477
1.008
1.870
2.697
6.700
14.996
27.460
56.429
64.316
154.339
®
®
ENVIRONMENTAL SPECIFICATIONS:
Operating temperature: -55˚C to 125˚C
Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5
cycles –65°C to +125°C)
Vibration: MIL-STD-202F Method 201A
Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative
humidity (95%) and elevated temperature (40°C) for 240 hours.
Salt Spray: MIL-STD-202F Method 101D, Test Condition B
PHYSICAL SPECIFICATIONS:
Material: Body: Ceramic
Cap: Nickel Plated Brass
Leads: Tin Plated Copper
Filler Sand (160mA – 10A)
Terminal Strength: MIL-STD-202F Method 211A,
Test Condition A
Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A
11
Product Marking: Cap 1: current and voltage rating.
Cap 2: Agency approval markings.
Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel).
www.littelfuse.com
421