15KPC Datasheet, PDF (1/1 Pages) Littelfuse – Silicon Avalanche Diodes - Unpackaged High Power Transient Voltage Suppressors

Silicon Avalanche Diodes
Unpackaged High Power Transient Voltage Suppressors
15KP CELLS
®
Designed to protect sensitive electronics which operate
within an environment of lightning induced, short duration,
high current pulses.
The 15KP cell series is specifically designed for high power,
space limited applications. The cell construction provides
three high power T.V.S. die connected in series via heat sink-
ing electrodes.
Devices can be soldered to a substrate via one electrode; con-
nection to the other electrode can then be made by soldering
a suitable jumper.
These devices are designed so they can be used in series/par-
allel configuration in order to provide a very high power
capability that is a far superior solution than using Metal
Oxide Varistors. The low clamping voltage, high speed
response and infinite life (if the maximum rating is not
exceeded) make this ultimate protection for sensitive elec-
tronics.
FEATURES
• 144,000 watts Peak Pulse Power based on 8/20µS (applies
to a single device).
Devices can be arranged in series/parallel to increase
surge handling capability.
ABSOLUTE MAXIMUM RATINGS @25˚C case temp
(unless otherwise noted)
SYMBOL
PPP
PM (AV)
Vf
Tj
Tstg
PARAMETER
Peak Pulse Power
8-20µsec. Pulse
Steady state power
dissipation (note 1)
Maximum instantaneous
forward voltage @100amps
(note 2)
Junction Temperature
Storage Temperature
VALUE
144,000
6.5
10.5
-55 to 150
-55 to 150
Units
W
W
V
˚C
˚C
Note 1. Mounted on copper pad area 40mm square.
Note 2. Using 300 microsecond square pulse; applies to uni-
directional only, and a single device only.
For devices used in series, this value should be multiplied by the
number of devices.
Characteristics @25˚C case temp (unless otherwise noted)
Part Working
Number voltage
(Vr)
Breakover Maximum Minimum Maximum Peak
Voltage (bv) leakage clamping Pulse Current
@It
current voltage ^{(lpp) @ Vcl}
min
It (Ir) @ Vr (Vcl) @lpp (Note 3)
volts _{volts mA} µA
volts
amps
15KP66CA ₆₆
73.2 1.0 10.0
35.0
1500
Note 3. Using 8/@20µS pulse as defined by ITU.
Other voltages are available on request.
Individual 5KP cells also available, please contact sales
for details.
3.30 +/- 0.20
6.86 +/- 0.13
All dimensions in mm
unless otherwise stated
306
www.littelfuse.com