0215012TXP Datasheet, PDF (1/2 Pages) Littelfuse – Axial Lead and Cartridge Fuses

Axial Lead and Cartridge Fuses
Designed to IEC Standard
5 x 20 mm ^{RoHS Pb}
Time Lag Fuse (Slo-Blo^® Fuse) 215P Series
®
®
• Designed to International (IEC) Standards for use globally.
• Meets the IEC 60127-2, Sheet 5 specification for Time Lag Fuses.
• Available in Cartridge and Axial Lead Form.
• Available in ratings of .125 to 12 amperes.
• High breaking capacity.
• RoHS compliant and Lead-Free
• Improved I² t
ELECTRICAL CHARACTERISTICS:
% of Ampere
Ampere
Opening
Rating
Rating
Time
150%
.1-6.3
8-12
60 minutes, Minimum
30 minutes, Minimum
210%
275%
400%
1000%
.1-12
.1-.8
1-12
.1-.8
1– 3.15
4– 6.3
.1-.8
1-12
30 minutes, Maximum
.25 sec., Min.; 80 sec. Max.
.75 sec., Min.; 80 sec. Max.
.05 sec., Min.; 5 sec. Max.
.095 sec., Min.; 5 sec. Max.
.150 sec., Min.; 5 sec. Max.
.005 sec., Min.; .15 sec., Max.
.010 sec., Min.; .15 sec., Max.
INTERRUPTING RATING: 1500 amperes @ 250VAC,
0.7-0.8 power factor.
ORDERING INFORMATION:
Cartridge
Catalog
Number
Ampere
Rating
Voltage
Rating
215.125P
.125
250
215.160P
.160
250
215.200P
.200
250
215.250P
.250
250
215.315P
.315
250
215.400P
.400
250
215.500P
.500
250
215.630P
.630
250
215.800P
.800
250
215 001.P
1
250
215 1.25P
1.25
250
215 01.6P
1.6
250
215 002.P
2
250
215 02.5P
2.5
250
215 3.15P
3.15
250
215 004.P
4
250
215 005.P
5
250
215 06.3P
6.3
250
215 008.P
8
250
215 010.P
10
250
215 012.P
12
250
Nominal
Resistance
Cold Ohms
7.585
7.100
1.840
1.240
0.880
0.583
1.168
0.720
0.468
0.152
0.107
0.071
0.057
0.039
0.028
0.019
0.015
0.011
0.009
0.007
0.006
Nominal
Melting I²t
A² Sec.
0.033
0.046
0.341
0.545
0.974
1.324
0.424
0.633
0.974
2.360
4.240
8.120
14.760
32.050
89.970
37.684
80.675
129.022
204.001
351.037
515.500
ENVIRONMENTAL SPECIFICATIONS:
Operating temperature: -55˚C to 125˚C
Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5
cycles –65°C to +125°C)
Vibration: MIL-STD-202F Method 201A
Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative
humidity (95%) and elevated temperature (40°C) for 240 hours.
Salt Spray: MIL-STD-202F Method 101D, Test Condition B
PHYSICAL SPECIFICATIONS:
Material: Body: Ceramic
Cap: Nickel Plated Brass
Leads: Tin Plated Copper
Filler: Sand (500mA – 12A)
Terminal Strength: MIL-STD-202F Method 211A,
Test Condition A
Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A
Product Marking: Cap 1: current and voltage rating.
11
Cap 2: Agency approval markings.
Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel).
www.littelfuse.com
427