0213200P Datasheet, PDF (1/2 Pages) Littelfuse – 5 x 20 mm Time Lag Fuse (Slo-Blo) Fuse

Axial Lead and Cartridge Fuses
5 x 20 mm ^{RoHS Pb}
Time Lag Fuse (Slo-Blo^®) Fuse 213P Series
• Designed to International (IEC) Standards for use globally.
• Meets the IEC 60127-2, Sheet 3 specification for Time Lag Fuses.
• Available in Cartridge and Axial Lead Form.
• Available in ratings of 0.200 to 6.3 amperes.
®
®
ELECTRICAL CHARACTERISTICS (213 Series):
% of Ampere
Rating
Ampere
Rating
Opening
Time
150%
.032 – 6.3
8 - 15
60 minutes, Minimum
30 minutes, Minimum
210%
275%
400%
1000%
.032 – 15
.032 – .100
.125 – 15
.032 – .100
.125 – 15
.032 – .100
.125 – 15
2 minutes, Maximum
0.2 sec., Min.; 10 sec. Max.
0.6 sec., Min.; 10 sec. Max.
.04 sec., Min.; 3 sec. Max.
.15 sec., Min.; 3 sec. Max.
.01 sec., Min.; 0.3 sec. Max.
0.02 sec., Min.; 0.3 sec. Max.
INTERRUPTING RATINGS: 35 amperes or 10 x rated current;
(whichever is greater) to a maximum 100A @ 250 VAC, unity power factor.
ORDERING INFORMATION:
Cartridge
213 Surge Withstand
Nominal
Catalog
Number
Ampere
Rating
Voltage Resistance
Rating Cold Ohms
0213.200P .200
0213.250P .250
0213.315P .315
0213.400P .400
0213.500P .500
0213.630P .630
0213.800P .800
0213001.P 1
02131.25P 1.25
021301.6P 1.6
0213002.P 2
021302.5P 2.5
02133.15P 3.15
0213004.P 4
0213005.P 5
021306.3P 6.3
250
1.60
250
1.05
250
0.848
250
0.535
250
0.370
250
0.275
250
0.164
250
0.116
250
0.082
250
0.055
250
0.045
250
0.030
250
0.023
250
0.017
250
0.012
250
0.010
Nominal
Melting
I²t A²Sec.
0.225
0.555
1.14
1.36
2.90
4.80
9.42
19.20
27.15
44.2
92.7
138.0
202.0
226.5
314
600
ENVIRONMENTAL SPECIFICATIONS:
Operating temperature: -55˚C to 125˚C
Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5
cycles –65°C to +125°C)
Vibration: MIL-STD-202F Method 201A
Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative
humidity (95%) and elevated temperature (40°C) for 240 hours.
Salt Spray: MIL-STD-202F Method 101D, Test Condition B
PHYSICAL SPECIFICATIONS:
Material: Body: Glass
Cap: Nickel Plated Brass
Leads: Tin Plated Copper
Terminal Strength: MIL-STD-202F Method 211A,
Test Condition A
Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A
Product Marking: Cap 1: current and voltage rating.
Cap 2: Agency approval markings.
11
Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel).
www.littelfuse.com
415